We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four silver aluminium wheel spacers with centre hub lip and stud holes

StanceMagic

StanceMagic 32 mm 5x114.3 Hubcentric Spacers 66.1 mm 12x1.25 Silver 4 pcs

SKU CH-175F-ZN49S

Four 32 mm hub-centric wheel spacers with a 5×114.3 bolt pattern and 66.1 mm centre bore for Nissan and Infiniti fitment

  • Hubcentric design centres the wheel on the 66.1 mm bore eliminating vibration
  • 32 mm thickness pushes wheels outward for wider stance and clearance
  • 5x114.3 bolt pattern with 12x1.25 studs fits listed Nissan and Infiniti models
  • CNC machined from aerospace billet aluminium for precise fit and strength
  • Four spacers included to equip all four corners of the vehicle

Fitment and purpose

These hubcentric wheel spacers are made for vehicles with a 5x114.3 bolt pattern and a 66.1 mm centre bore. The set contains four pieces, each 32 mm thick, and is intended for owners of listed Nissan and Infiniti models who need to push the wheel outwards for clearance or stance.

Behaviour under load

The spacers are CNC machined from aerospace billet aluminium, providing a solid mounting surface that does not compress under cornering or braking forces. The hubcentric lip centres the wheel on the hub rather than relying on the studs alone, so the joint carries shear loads through the aluminium body instead of the fasteners.

Build and daily implications

Each spacer uses pressed-in M12x1.25 studs with a 66.1 mm lip diameter that matches the hub bore. Installation requires verifying that factory studs are shorter than 32 mm and that the wheel centre bore is at least 66.1 mm; longer studs may need trimming. The silver anodised finish resists corrosion during year-round road use.

Highlights

  • Hubcentric design centres the wheel on the 66.1 mm bore eliminating vibration
  • 32 mm thickness pushes wheels outward for wider stance and clearance
  • 5x114.3 bolt pattern with 12x1.25 studs fits listed Nissan and Infiniti models
  • CNC machined from aerospace billet aluminium for precise fit and strength
  • Four spacers included to equip all four corners of the vehicle

Specifications

BrandStanceMagic

Questions about this item

How much extra clearance does the 32 mm thickness add between the wheel and fender when running all day?

Each spacer is 32 mm thick, adding that exact distance between the hub face and the wheel mounting surface.

What factory stud thread must the vehicle already have for these 12x1.25 spacers to bolt on?

The vehicle must use M12x1.25 wheel studs; the supplied studs match that pitch.

Will the 66.1 mm hubcentric lip centre wheels that have a 66.2 mm centre bore on an older Nissan?

Yes, the 66.1 mm lip fits bores of 66.1 mm or larger, so a 66.2 mm bore centres correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.