SQUARE D
SQUARE D Lever Arm Wobble Stick 3.5 in Actuator for 9007C
A 3.5 in steel wobble-stick actuator designed for 9007C limit switches
- TypeLight Switch
- Wobble-stick actuator provides flexible 3.5 in reach
- Steel arm delivers durable .25 in wide construction
- Compatible with Square D 9007C limit switches
- Compact .39 in depth fits tight enclosures
- Precision .13 in roller ensures reliable actuation
Lever Arm Wobble Stick Actuator
This Square D lever arm wobble stick actuator is designed for use with the 9007C limit switch. The 3.5 in steel arm provides mechanical actuation for industrial control applications. It suits maintenance technicians and panel builders who need a direct replacement actuator. The arm width is .25 in and arm depth is .39 in.
Thermal Noise and Power Draw
As a passive mechanical component, this actuator generates no heat and produces no electrical noise during operation. It draws zero power because it contains no electronic or motorised parts. The steel construction ensures consistent movement without thermal expansion concerns. Roller diameter is .13 in for smooth engagement.
Sustained Load Behaviour
Under continuous cycling the steel arm maintains its dimensional stability and actuation force. The wobble stick design allows multi-directional movement without binding during prolonged use. No lubrication is required for the roller interface over the service life. The actuator returns to centre reliably after each actuation cycle.
Highlights
- Wobble-stick actuator provides flexible 3.5 in reach
- Steel arm delivers durable .25 in wide construction
- Compatible with Square D 9007C limit switches
- Compact .39 in depth fits tight enclosures
- Precision .13 in roller ensures reliable actuation
Specifications
| Brand | Square D |
|---|---|
| Type | Light Switch |
Questions about this item
How do I install the 3.5 in lever arm onto a 9007C switch body, and what step is often missed?
Align the steel arm with the switch shaft, secure the set screw firmly, then verify the .13 in roller diameter clears the cam track; the missed step is confirming the .25 in arm width seats fully in the guide slot.
What maintenance or replacement will the wobble stick need after extended service?
Inspect the .13 in roller for flat spots and the .39 in arm depth for bending; replace the complete actuator if the steel arm shows fatigue cracks or the roller no longer rotates freely.
What is the first limit that appears when the 9007C lever arm cycles continuously under load?
The .13 in roller diameter creates the initial wear point; sustained actuation causes roller surface degradation before the .25 in arm width or .39 in arm depth dimensions are affected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
$9.99
0.00011938BTC
In stock