SQUARE D BY SCHNEIDER ELECTRIC
SQUARE D BY SCHNEIDER ELECTRIC 9050JCK12V14 Time Delay Relay
A single-function on-delay relay with a 0.3 to 30 second adjustable range, 24 V AC/DC coil, and 10 A DPDT contacts in an 8-pin plug-in housing
- Adjustable timing from 0.3 to 30 seconds with rotary knob
- 10 A switching at 120/240 V AC and 30 V DC
- DPDT contacts handle two circuits in one relay
- 24 V AC/DC coil suits common control voltages
- Plug-in octal base with sealed body for quick mounting
Time Delay Relay for Industrial Control
This single-function time delay relay provides on-delay timing for industrial control circuits. It accepts 24V AC/DC coil voltage and switches loads up to 10 A at 120/240V AC or 30V DC. The sealed, plug-in design mounts into an octal socket for quick installation.
Adjustable On-Delay Range 0.3 to 30 Seconds
The rotary knob sets a single on-delay period between 0.3 seconds and 30 seconds. This range determines whether the relay matches the timing requirement of the application. Verify the needed delay falls within these limits before selecting this part.
Plug-In Octal Base Frees Panel Space
The eight-pin octal base plugs into a standard socket, eliminating hard wiring and allowing fast replacement without tools. The sealed body resists contaminants, while the 2.75 in depth fits typical panel enclosures. Ensure the socket and control voltage match the 24V AC/DC specification.
Highlights
- Adjustable timing from 0.3 to 30 seconds with rotary knob
- 10 A switching at 120/240 V AC and 30 V DC
- DPDT contacts handle two circuits in one relay
- 24 V AC/DC coil suits common control voltages
- Plug-in octal base with sealed body for quick mounting
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
How does the 0.3 to 30 second delay range work in an actual control circuit?
The rotary knob lets you set any on-delay between 0.3 and 30 seconds, so the output contacts change state only after the chosen interval once the 24 V coil is energised.
What does the 24 V AC/DC coil voltage mean for wiring and control logic?
The coil accepts either 24 V AC or 24 V DC, so you can drive it from the same low-voltage supply used for other panel devices without a separate transformer.
Will the octal 8-pin plug-in base fit a standard DIN-rail socket in my panel?
Yes, the relay uses an octal 8-pin plug-in base designed for standard octal sockets, and the sealed body is 2.75 in deep for panel depth planning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
