We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Natural-colour single-pole terminal block with two screw-clamp tiers and DIN-rail foot

SQUARE D

SQUARE D 9080GA6 Terminal Block 1 Pole 40 A 600 V

SKU CH-1QGZ-4CV9E

A single-pole DIN-rail terminal block rated 40 A at 600 V with screw-clamp connections for 22-12 AWG copper wire

  • TypeElectrical Connectors
  • Colornatural
  • Screw-clamp connection handles solid and stranded copper up to 12 AWG
  • 40 A, 600 V rating supports demanding control-circuit loads
  • Two-tier DIN-rail design fits tight panel layouts
  • CE, CSA, RoHS and UL Component Recognised for code compliance
  • Compact 1.48 in × 1.8 in × 0.37 in body saves cabinet space

Terminal Block for DIN Rail Mounting

The Square D 9080GA6 is a single-pole terminal block rated for 40 A at 600 V. It accepts solid or stranded copper conductors from 22 AWG up to 12 AWG using screw-clamp connections. The natural-coloured housing mounts on standard DIN rail for panel building and control-circuit wiring.

Screw-Clamp Connection Limits

Screw-clamp terminals provide secure contact for the stated wire range but require correct torque during installation. The block carries CE, CSA, UL Component Recognised and RoHS markings. It offers no integrated circuit protection or fuse holder, so over-current devices must be provided elsewhere in the circuit.

Single-Pole Capacity and Headroom

One pole handles 40 A continuous within the 600 V rating, giving headroom for typical control and lighting loads. Builders needing multi-pole distribution or fused protection must use additional blocks. The two-tier layout keeps wiring compact but does not increase the pole count.

Highlights

  • Screw-clamp connection handles solid and stranded copper up to 12 AWG
  • 40 A, 600 V rating supports demanding control-circuit loads
  • Two-tier DIN-rail design fits tight panel layouts
  • CE, CSA, RoHS and UL Component Recognised for code compliance
  • Compact 1.48 in × 1.8 in × 0.37 in body saves cabinet space

Specifications

TypeElectrical Connectors
BrandSQUARE D
Colornatural

Questions about this item

Should I pick the single-pole 40 A block or a multi-pole version for my panel?

The 9080GA6 is a single-pole unit rated for 40 A at 600 V; choose it when you need one isolated circuit, and select a multi-pole block only if the design calls for several poles side by side.

What does the 40 A rating mean once the block is wired into a cabinet?

It means the screw-clamp connection can continuously carry 40 A through copper conductors from 22 AWG up to 12 AWG without exceeding its temperature limits.

The block is UL Component Recognised and CSA approved — what does that cap in practice?

Those approvals confirm the block meets North American safety requirements for 600 V industrial control circuits, so the practical voltage ceiling is the marked 600 V when installed per the standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.