We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square D 9013FS pressure switch, compact grey box with 1/4 inch port and terminals

SQUARE D

SQUARE D 9013FS Pressure Switch 20-40PSI DPST

SKU CH-6WRJ-3SZ7A

Controls water pumps at 20-40 PSI with DPST contacts rated for 10 A at 120/240 V

  • TypeLight Switch
  • Factory-set 20/40 psi range suits common water-pump cycles
  • DPST contacts handle 10 A for reliable motor switching
  • Rated 1½ hp at 120 V and 2 hp at 240 V single-phase
  • Operates from -22 °F to 257 °F for harsh environments
  • NEMA 1 enclosure protects switch mechanism indoors

Water-pump pressure switch

The Square D 9013FS is a DPST pressure switch designed to control water-pump motors automatically. It operates on a factory-set 20 to 40 psi range with a 15 to 30 psi adjustable differential. The single 1/4 in FNPT port connects directly to the pump system. NEMA 1 rating limits use to indoor or protected locations.

Motor-load capacity and pressure limits

The switch handles 1 1/2 hp at 120 V single-phase, 2 hp at 240 V single-phase, 3 hp at 240 V three-phase and 1 hp at 480 V three-phase. Pressure settings can be adjusted anywhere from 5 to 65 psi, but the differential cannot be set below 15 psi or above 30 psi. Operating temperature spans -22 to 257 degrees F, so extreme cold or heat beyond that range is not supported.

Manual auto-off lever and wiring format

A manual Auto/Off lever on the cover lets the user disable automatic cycling without rewiring. The DPST contact form breaks both lines simultaneously for positive motor disconnect. No unloader valve is included, so systems requiring head-pressure relief need a separate unloader. The 10 A contact rating suits the listed motor loads without additional relay.

Highlights

  • Factory-set 20/40 psi range suits common water-pump cycles
  • DPST contacts handle 10 A for reliable motor switching
  • Rated 1½ hp at 120 V and 2 hp at 240 V single-phase
  • Operates from -22 °F to 257 °F for harsh environments
  • NEMA 1 enclosure protects switch mechanism indoors

Specifications

BrandSquare D
TypeLight Switch

Questions about this item

Will the 9013FS pressure switch control my existing 120 V 1 1/2 hp water pump motor?

Yes, the switch is rated for 1 1/2 hp at 120 V single phase, matching that motor.

How can I verify the 9013FS is cycling at the correct 20-40 psi range after installation?

Watch the system pressure gauge; the pump should start at 20 psi and stop at 40 psi.

Does the 9013FS come with a pressure gauge or unloader valve, or must I buy them separately?

The switch includes no gauge and no unloader valve; both must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.