We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white CPVC inline ball valve with tee handle

Spears

Spears 2132-010C 1" CPVC Compact Ball Valve

SKU CH-D9SD-522NC

Inline CPVC ball valve with socket connections, rated 235 psi and 32 to 190 °F, featuring Safe-T-Shear stem and FKM seals

  • TypeOther
  • Compact flow control for 1 in CPVC lines
  • 235 psi CWP rating handles high-pressure systems
  • Safe-T-Shear stem prevents stem blow-out
  • FKM seats and seals resist chemical attack
  • Operates from 32 to 190 Degrees F

Compact CPVC Ball Valve for 1" Socket Lines

The Spears 2132-010C is a 1-inch inline ball valve built for CPVC piping systems. It connects via socket ends on both sides and uses a standard-port design. The single-piece body simplifies installation in residential or commercial bath plumbing. It suits installers needing a compact shut-off point for hot or cold water distribution.

Sustained Pressure and Temperature Performance

The valve carries a 235 psi CWP rating and operates continuously between 32 and 190 degrees Fahrenheit. FKM seats and body seals maintain sealing integrity through thermal cycling. The PVC ball and stem resist scale buildup in hard water. The Safe-T-Shear stem design protects the seal if the handle is over-torqued during long-term service.

Replaces Threaded or Multi-Piece Valves in CPVC Runs

This unit replaces older threaded brass or multi-piece plastic valves where solvent-weld socket joints are preferred. The upgrade is worth it when eliminating leak paths at threaded connections or when a lower-profile tee handle fits tight cabinet clearances. It does not suit systems requiring full-port flow or metal-body construction.

Highlights

  • Compact flow control for 1 in CPVC lines
  • 235 psi CWP rating handles high-pressure systems
  • Safe-T-Shear stem prevents stem blow-out
  • FKM seats and seals resist chemical attack
  • Operates from 32 to 190 Degrees F

Specifications

BrandSPEARS
TypeOther

Questions about this item

Does the 235 psi CWP rating mean the valve runs hot or noisy under continuous flow?

The valve body is CPVC with a PVC ball and FKM seats, so it has no moving electrical parts and produces no noise or heat of its own.

What piping and solvent cement do I need to install this 1 in socket valve?

You need 1 in CPVC pipe and CPVC-compatible solvent cement for the socket x socket connections.

Will the FKM seals and PVC ball hold up if I keep my existing 190 Degrees F hot-water loop?

Yes, the temperature range is 32 to 190 Degrees F and the FKM body seals are rated for that upper limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.