We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SoNNeT UA1006B USB 3.0 to SATA Adapter with 30W Power Supply

SKU CH-0PX3-8RWXQ

Connects 2.5" and 3.5" SATA drives via USB-A or Type-C with a 30W power supply and UASP for 5Gbps transfers

  • ColorBlack
  • SpecificationsUA1006B, 2.5 amps, 1, FARBOKO
  • Features2.5 amps, 1, FARBOKO, UA1006B
  • Package Quantity1
  • Connect 2.5 and 3.5 inch drives via USB-A or USB-C
  • 30W power supply runs 3.5 inch drives up to 18TB capacity
  • USB 3.0 with UASP reaches 5Gbps theoretical transfer speed
  • Driver-free operation on Windows, macOS 10.6+, Linux and Chrome OS
  • 6ft cable length for flexible drive placement

Dual USB-A and Type-C Interface

The SoNNeT UA1006B adapter connects 2.5-inch and 3.5-inch SATA drives to computers using either a USB-A or a Type-C port. It supports Windows 7 through 11, macOS 10.6 and later, Linux and Chrome OS without driver installation. The included 30W power supply enables reliable operation of 3.5-inch drives up to 18TB capacity.

Sustained Transfer with UASP

USB 3.0 and UASP support deliver a theoretical 5Gbps link so large transfers maintain speed rather than dropping after an initial burst. A 1GB file moves in roughly 3 seconds under typical conditions. The 2.5A power output keeps 3.5-inch mechanical disks spinning steadily during extended backup or recovery sessions.

Powered Operation and Cable Length

The external 12V 2.5A adapter powers the drive independently of the host port, preventing voltage sag on busy laptops. A 1.6ft cable provides enough reach for desk use without adding clutter. The black plastic housing stays cool during normal use because the power brick handles the conversion heat away from the data path.

Highlights

  • Connect 2.5 and 3.5 inch drives via USB-A or USB-C
  • 30W power supply runs 3.5 inch drives up to 18TB capacity
  • USB 3.0 with UASP reaches 5Gbps theoretical transfer speed
  • Driver-free operation on Windows, macOS 10.6+, Linux and Chrome OS
  • 6ft cable length for flexible drive placement

Specifications

BrandSoNNeT
SeriesUA1006B
ModelUA1006B
Part NumberUA1006B
ColorBlack
SpecificationsUA1006B, 2.5 amps, 1, FARBOKO
Features2.5 amps, 1, FARBOKO, UA1006B
Package Quantity1

Questions about this item

Does the 30 W power adapter run hot or make noise when a 3.5-inch drive spins all day?

The 30 W (12 V / 2.5 A) supply is designed to power 3.5-inch drives up to 18 TB continuously; it has no fan, so it operates silently and stays cool under normal load.

Which cables or ports must my computer already have to use both the USB-A and Type-C connectors?

Your host needs either a standard USB-A 3.0 port or a USB-C port that supports USB 3.0 data; the 1.6 ft cable ends in both plugs so you can choose whichever port is free.

Will this adapter work with an older SATA drive from a Windows 7 machine alongside my current Windows 11 laptop?

Yes — the adapter is recognised by Windows 7 through 11, macOS 10.6+, Linux and Chrome OS without drivers, so the same legacy drive can be accessed on any of those systems.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.