We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK USB to 5.5x2.1mm DC 5V-9V/12V Boost Cable

SKU CH-FDZ0-271BZ

Converts USB 5V power into stable 9V or 12V DC output through a 5.5x2.1mm plug for routers, cameras and other small electronics

  • Converts USB 5 V to stable 9 V or 12 V DC output
  • 5×2.1 mm DC male plug fits routers cameras and other small devices
  • Built-in boost chip delivers low ripple stable voltage and reduces overheating risk
  • Integrated cable design removes separate booster boards for compact portable wiring
  • Flexible durable jacket resists bending for long service life and plug-and-play use

USB 5 V to 9 V/12 V boost cable

This SMUGDESK cable integrates a boost converter that raises a standard USB 5 V supply to a stable 9 V or 12 V DC output. It terminates in a 5.5×2.1 mm DC male plug and draws power from any USB charger, power bank or laptop port.

Devices needing 9 V or 12 V from USB

The cable suits routers, mini cameras, LED strips, portable audio gear and single-board computers that require 9 V or 12 V and accept the 5.5×2.1 mm barrel connector. It will not work for equipment needing a different voltage, higher current than the USB source can deliver, or a different DC plug size.

Plug-and-play installation

Simply connect the USB end to a 5 V source and the DC plug to the target device; no drivers or configuration are required. The most common issue is insufficient current from the USB port, which can cause voltage drop or device instability under load.

Highlights

  • Converts USB 5 V to stable 9 V or 12 V DC output
  • 5×2.1 mm DC male plug fits routers cameras and other small devices
  • Built-in boost chip delivers low ripple stable voltage and reduces overheating risk
  • Integrated cable design removes separate booster boards for compact portable wiring
  • Flexible durable jacket resists bending for long service life and plug-and-play use

Specifications

No published specifications for this item yet.

Questions about this item

What USB power source do I need to run this 5.5x2.1mm DC boost cable?

Plug the USB end into any 5V source such as a USB charger, power bank or laptop port to get 9V or 12V DC output.

Will the 5.5x2.1mm plug fit the DC jack on my older router that needs 9V or 12V?

The 5.5x2.1mm male plug matches the standard barrel size used on most routers, cameras and similar low-power DC gear.

How can I confirm the cable is delivering a stable 9V or 12V after I connect it?

Measure the DC plug with a multimeter; a steady reading at the chosen voltage with low ripple shows the boost chip is working correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.