SMUGDESK
SMUGDESK USB 3.1 Type-C to SATA 3.0 adapter cable 15+7pin
Connects 2.5 and 3.5 inch SATA drives to USB 3.1 Type-C ports at up to 6Gbps for data backup, cloning and drive testing
- Up to 6Gbps transfer speed with SATA 3.0 standard
- Works with 2.5 and 3.5 inch SATA HDD and SSD
- Reversible Type-C plug for easy connection to host devices
- Integrated 15+7pin SATA power and data interface for stable signal
- Plug and play operation with no driver installation required
USB 3.1 Type-C to SATA 3.0 Adapter
This USB 3.1 Type-C to SATA 3.0 adapter cable converts internal 2.5 inch and 3.5 inch SATA drives into external storage. It connects a Type-C host port to standard 15+7pin SATA interfaces for drives. The adapter supports up to 6Gbps data transfer speeds following the SATA 3.0 standard. Plug and play operation requires no extra drivers for immediate use.
Suited for drive reuse and recovery
Ideal for users accessing 2.5 inch SSDs or HDDs directly powered by the Type-C port. It serves hardware maintenance, PC modding, disk cloning and data rescue tasks. Not suited for 3.5 inch mechanical drives needing external power not supplied by the adapter. Also not suited for drives lacking a standard SATA interface.
Single specification: SATA 3.0 6Gbps bandwidth
The SATA 3.0 interface limits maximum throughput to 6Gbps regardless of the host USB 3.1 capability. This determines transfer speed for large media files and disk imaging tasks. Verify your drive uses a standard SATA interface to match the 15+7pin connector. The Type-C plug offers reversible insertion for easier connection.
Highlights
- Up to 6Gbps transfer speed with SATA 3.0 standard
- Works with 2.5 and 3.5 inch SATA HDD and SSD
- Reversible Type-C plug for easy connection to host devices
- Integrated 15+7pin SATA power and data interface for stable signal
- Plug and play operation with no driver installation required
Specifications
No published specifications for this item yet.
Questions about this item
Do I need a separate power supply for my 3.5-inch SATA drive with this adapter?
Most 3.5-inch mechanical hard disks need external power; the Type-C port alone cannot supply enough current.
Will this adapter work with a USB 3.0 Type-A port if I use a Type-C to Type-A cable?
The adapter requires a native Type-C host port; a passive Type-C to Type-A cable will not provide the correct signaling.
How can I confirm the adapter is running at SATA 3.0 speeds after connecting my SSD?
Check the link speed in your OS disk utility — it should report 6 Gbps for a SATA 3.0 drive on this adapter.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
