SMUGDESK
SMUGDESK USB 3.0 Active Extension Cable 16 ft with 5 V Power Cable
Active USB 3.0 extension cable reaches 16 ft with built-in signal booster chips and a 5 V power cable for reliable 5 Gbps data transfer
- Extends USB reach to 16 ft with built-in signal booster chips
- Delivers 5 Gbps data transfer, ten times faster than 480 Mbps
- Gold-plated connectors resist corrosion for lasting conductivity
- Triple-layer shielding blocks EMI and RFI to minimise data loss
- Works with USB 3.0, 2.0, 1.1 and 1.0 devices including VR, consoles and printers
USB 3.0 Active Extension Cable 16 ft
This active USB 3.0 extension cable adds 16 feet of reach between a host Type-A port and a Type-A peripheral. Built-in signal booster chips maintain full SuperSpeed integrity over the longer run. The design suits home-office users, gamers and anyone connecting cameras, printers or VR headsets across a room. It is not for installations that need more than the supplied length or that lack a free USB port for the auxiliary power lead.
5 Gbps SuperSpeed with 5 V power assist
The cable delivers up to 5 Gbps transfer rates, ten times the 480 Mbps ceiling of USB 2.0, and remains backwards compatible with 2.0, 1.1 and 1.0 devices. Triple shielding and gold-plated contacts preserve signal quality at the full 16-foot span. The included 5 V power cable supplies extra current for bus-hungry peripherals such as hard drives or VR sensors. Without an available USB-A power source the booster cannot operate and the link falls back to shorter passive limits.
Gold-plated connectors and triple shielding
Corrosion-resistant gold plating on both Type-A plugs ensures durable, low-resistance mating cycles. A multi-layer shield — aluminium foil plus braid over tin-plated copper conductors — rejects EMI and RFI in electrically noisy environments. The package supplies only the active extension cable and the 5 V power lead; no driver disc, mounting hardware or additional adapters are included. Users needing right-angle ends or locking screws must source those separately.
Highlights
- Extends USB reach to 16 ft with built-in signal booster chips
- Delivers 5 Gbps data transfer, ten times faster than 480 Mbps
- Gold-plated connectors resist corrosion for lasting conductivity
- Triple-layer shielding blocks EMI and RFI to minimise data loss
- Works with USB 3.0, 2.0, 1.1 and 1.0 devices including VR, consoles and printers
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK 50 Feet USB 3.0 Active Extension Cable Male to Female with Power Adapter
SMUGDESK USB 3.0 Active Extension Cable A Male to A Female 32ft 5Gbps 5V 2A Power Adapter
SMUGDESK USB 3.0 Active Extension Cable 65 Feet Type A Repeater with 3 Signal Boosters
Questions about this item
Will the 16 ft active extension cable maintain 5 Gbps transfer rates when connected to my existing USB 2.0 hub?
The cable is backwards compatible with USB 2.0, 1.1 and 1.0 devices, so it will work with your hub, but the transfer rate will be limited to the hub's 480 Mbps maximum.
How can I verify the built-in signal booster chips are functioning correctly after installation?
Connect a USB 3.0 device and confirm it operates at Super Speed 5 Gbps without signal drop over the full 16 ft length, which the active chips are designed to prevent.
Does the package include the 5 V power cable and are any additional adapters required for a standard USB 3.0 Type A female port?
The 5 V power cable is included; the cable uses a USB 3.0 Type A male connector on one end and a Type A female port on the other, so no extra adapters are needed for standard ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector








