We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Long black USB 3.0 active extension cable with male and female connectors, 65ft length

SMUGDESK

SMUGDESK 65ft USB 3.0 Active Extension Cable A-Male to A-Female

SKU CH-Y49K-DP3QB

Active USB 3.0 extension cable with built-in signal booster chips, 22AWG tinned copper conductors and foil braided shielding for 65ft runs, plus a 5V/2A power adapter for devices drawing over 900mA

Cable Length 65 Feet

  • Active signal-boosting chips maintain full USB 3.0 speed at 65 ft
  • Gold-plated connectors and 22 AWG tinned copper deliver stable data transfer
  • Triple shielding with foil and braid blocks EMI and RFI interference
  • Included 5 V / 2 A adapter powers devices drawing over 900 mA
  • Backward compatible with USB 2.0 and 3.0 peripherals from VR headsets to printers

Purpose-built long reach

This 65ft active USB 3.0 extension cable connects a computer or Windows tablet to peripherals at distances beyond standard passive limits. It targets VR users, office setups and home configurations where the host and device cannot sit side by side. Builders needing only a short link or a different connector type will not use this product.

Signal integrity over distance

Three built-in booster chips prevent attenuation so SuperSpeed performance is maintained across the full length. The cable uses 22AWG tinned copper conductors with foil and braided shielding to suppress EMI and RFI. A supplied 5V/2A power adapter must be connected when the attached device draws more than 900mA.

Power adapter enables high-draw devices

The included 5V/2A adapter delivers stable current and back-pressure protection for long runs. With it attached, the cable supports bus-powered hard drives, VR headsets and hubs that would otherwise exceed the port’s current limit. Without the adapter, only low-power peripherals such as keyboards, mice or flash drives operate reliably.

Highlights

  • Active signal-boosting chips maintain full USB 3.0 speed at 65 ft
  • Gold-plated connectors and 22 AWG tinned copper deliver stable data transfer
  • Triple shielding with foil and braid blocks EMI and RFI interference
  • Included 5 V / 2 A adapter powers devices drawing over 900 mA
  • Backward compatible with USB 2.0 and 3.0 peripherals from VR headsets to printers

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 65ft active USB 3.0 extension cable and what step is often missed?

Connect the A-Male end to the host and the A-Female end to the device; if the peripheral draws more than 900mA you must plug in the included 5V/2A power adapter or the link will not hold at full length.

What maintenance or replacement will this cable need over time?

The cable itself has no serviceable parts; only the external 5V/2A power adapter may need replacing if its output drifts or the barrel connector wears out after extended use.

What limit appears first during sustained high-bandwidth use at full length?

The 900mA bus-power ceiling is reached first; devices pulling more current require the supplied 5V/2A adapter to maintain USB 3.0 SuperSpeed across the entire 65ft run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.