We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and USB-C connector

SMUGDESK

SMUGDESK UR108 M.2 NVMe to USB 3.2 Gen2 Adapter 10Gbps RTL9210CN

SKU CH-87F6-C11Z2

Converts an M.2 NVMe SSD to USB 3.2 Gen2 at 10Gbps with RTL9210CN controller for plug-and-play external storage

  • NVMe SSD connects at 10Gbps via USB 3.2 Gen2
  • RTL9210CN controller keeps transfers stable and fast
  • Works with Windows, macOS, Linux and Android
  • Compact PCB design adds portable external storage
  • True plug-and-play with no driver needed

SMUGDESK UR108 NVMe Adapter

The SMUGDESK UR108 is an M.2 NVMe to USB 3.2 Gen2 adapter board built around the RTL9210CN controller. It enables up to 10Gbps transfer speeds for compatible NVMe solid state drives. The compact PCB design is made for portable external storage expansion and works across Windows, macOS, Linux and Android platforms with true plug-and-play operation.

Who this suits

This adapter suits anyone wanting to turn a spare M.2 M-Key NVMe SSD into a high-speed portable drive for data backup or fast file transfers between systems. It is not for users who need to connect drives using other interfaces or form factors not supported by the M-Key NVMe specification. Buyers requiring internal mounting brackets or additional cooling hardware should look at a dedicated enclosure instead.

Deciding specification

The RTL9210CN controller delivering USB 3.2 Gen2 at 10Gbps is the specification that determines whether this adapter can saturate your NVMe SSD's potential. If your workflow demands that bandwidth for large sequential transfers, this board matches the requirement. If your host ports are limited to lower USB generations, the adapter will still function but cannot reach its rated ceiling.

Highlights

  • NVMe SSD connects at 10Gbps via USB 3.2 Gen2
  • RTL9210CN controller keeps transfers stable and fast
  • Works with Windows, macOS, Linux and Android
  • Compact PCB design adds portable external storage
  • True plug-and-play with no driver needed

Specifications

No published specifications for this item yet.

Questions about this item

How do I install an M.2 NVMe SSD into the UR108 adapter and what step is often missed?

Insert the SSD at an angle into the M-key slot, press it down flat, and secure it with the retaining screw; the step people skip is fastening that screw, which keeps the drive electrically connected.

What maintenance or replacement will the RTL9210CN adapter need over time?

The adapter itself has no moving parts or wear items; only the NVMe SSD you install may eventually require replacement after its rated write endurance is reached.

What is the first performance limit reached during sustained transfers on this USB 3.2 Gen2 device?

The 10Gbps USB 3.2 Gen2 interface caps continuous throughput, so sustained speeds cannot exceed that bandwidth even if the NVMe SSD is faster.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.