We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular PoE splitter with micro USB output and Ethernet ports

SMUGDESK

SMUGDESK UCT5159 IEEE 802.3af PoE Splitter 48V to 5V 2.4A Micro USB Adapter

SKU CH-FXF3-PPCC2 MPN UCT5159

Converts 48 V PoE to 5 V 2.4 A micro USB, powering Raspberry Pi or cameras up to 100 m over a single Ethernet cable

  • Single cable delivers 5V 2.4A power plus data up to 100 m
  • IEEE 802.3af compliant splitter converts 48V PoE to stable 5V microUSB output
  • Works with Raspberry Pi 2 3B+ Dropcam tablets and microUSB IoT gear
  • Built-in overvoltage overcurrent and short-circuit protection guards connected devices
  • Plug-and-play setup needs no drivers ideal for remote locations without wall outlets

PoE Splitter for Micro-USB Devices

The SMUGDESK UCT5159 is an active IEEE 802.3af PoE splitter that converts 48V input into a regulated 5V 2.4A output through a Micro-USB connector. It targets installers and hobbyists who need to power Raspberry Pi 2 or 3B+, Dropcam units, tablets or similar micro-USB IoT gear from a network cable instead of a wall socket.

Single-Cable Power and Data

By accepting 4457V DC PoE from a compliant switch or injector, the adapter separates power and signal so one CAT5e or CAT6 run up to 100 meters delivers both Ethernet connectivity and up to 12W of power. This removes the need for local AC adapters and extra cabling at the device location.

Protected Plug-and-Play Deployment

Integrated overvoltage, overcurrent and short-circuit protection guards connected hardware from power faults during long-term operation. No drivers or configuration are required; the unit works immediately on connection, making it practical for remote surveillance, edge nodes or smart-home sensors placed far from mains outlets.

Highlights

  • Single cable delivers 5V 2.4A power plus data up to 100 m
  • IEEE 802.3af compliant splitter converts 48V PoE to stable 5V microUSB output
  • Works with Raspberry Pi 2 3B+ Dropcam tablets and microUSB IoT gear
  • Built-in overvoltage overcurrent and short-circuit protection guards connected devices
  • Plug-and-play setup needs no drivers ideal for remote locations without wall outlets

Specifications

No published specifications for this item yet.

Questions about this item

Will the micro USB connector or the internal protection circuit need routine replacement?

The splitter has no user-serviceable parts; its built-in overvoltage, overcurrent and short-circuit protection is solid-state and designed to last the life of the unit.

What limits how much power the splitter can deliver continuously?

It is capped at 12 W (5 V at 2.4 A) by the IEEE 802.3af input standard, so sustained loads above that will trip the protection.

Does the adapter get hot or draw extra power when it runs all day?

It passes through only the 12 W needed by the attached device, so heat stays low and there is no separate AC draw beyond the PoE source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.