We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin black cable with wide 74-pin connector splitting to two smaller SAS plugs

SMUGDESK

SMUGDESK SlimSAS SFF8654 8i to 2×SFF8087 Fanout Cable .5m 12Gbps

SKU CH-ERJ5-VC6Q3

Splits a single SFF8654 8i port into two SFF8087 Mini SAS connectors for 12Gbps RAID and storage links

  • Converts one SFF8654 8i port to dual SFF8087 ports
  • 12Gbps bandwidth supports enterprise RAID and storage performance
  • Anti-misplug design prevents wrong insertion and protects hardware
  • 32AWG pure copper with 85ohm impedance minimises signal loss
  • 5m compact length optimises internal server wiring layout

SlimSAS SFF8654 8i fanout cable

This cable converts a single SFF8654 8i 74pin host port into two SFF8087 Mini SAS connectors. It supports 12Gbps data transfer for enterprise server RAID arrays and multi-drive storage systems. The compact 0.5m length suits dense internal wiring layouts. It is not for users needing longer reach or different connector types.

Anti-misplug design and 32AWG construction

The anti-misplug structure prevents incorrect insertion that could damage server hardware during installation. Premium 32AWG pure copper conductors with strict 85ohm impedance matching minimise signal loss and crosstalk. No special tools are required beyond standard SAS connector handling. Builders without SAS backplane experience should verify port orientation before seating.

12Gbps SAS bandwidth specification

The single specification that decides fit is the 12Gbps SAS signalling rate across the SFF8654 to dual SFF8087 fanout. This matches controllers and backplanes rated for that speed. Systems requiring a different protocol or lower signalling standard will not be compatible with this cable.

Highlights

  • Converts one SFF8654 8i port to dual SFF8087 ports
  • 12Gbps bandwidth supports enterprise RAID and storage performance
  • Anti-misplug design prevents wrong insertion and protects hardware
  • 32AWG pure copper with 85ohm impedance minimises signal loss
  • 5m compact length optimises internal server wiring layout

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 12Gbps link is active after connecting the SFF8654 8i port to the RAID controller?

Check the controller BIOS or management utility for a negotiated 12Gbps link speed on each SFF8087 port and run a drive detection scan to verify all attached drives appear without errors.

What connectors and cables are included, and what must I supply separately?

The box contains the .5m fanout cable with one SFF8654 8i 74pin plug and two SFF8087 Mini SAS plugs; you must provide the RAID controller, backplane or drives with matching SFF8087 ports.

When should I choose this .5m 32AWG 85ohm version over a longer or different gauge cable?

Choose this version when the SFF8654 8i host port and the dual SFF8087 targets are within .5m in a compact chassis, and the 32AWG 85ohm construction meets the 12Gbps signal integrity requirement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.