We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SlimSAS 4.0 SFF8654 4i left-angle plug to SAS SFF8087 right-angle connector on shielded cable

SMUGDESK

SMUGDESK SlimSAS 4.0 SFF8654 4i to SAS SFF8087 LeftAngle Adapter Cable

SKU CH-DDF9-R0J1B

Left-angle adapter cable connects SlimSAS 4.0 SFF8654 4i to SAS SFF8087 for tight server chassis

  • Left-angled connector fits tight server chassis
  • SlimSAS 4.0 delivers high-bandwidth stable transmission
  • Left-angle design prevents cable bending damage
  • Server-grade shielding reduces signal loss and interference
  • Connects SFF-8654 4i to SFF-8087 for storage expansion

Left-Angle SlimSAS 4.0 Adapter Cable

This left-angle adapter cable bridges a SlimSAS 4.0 SFF8654 4i host interface to a SAS SFF8087 target connector. It is built for enterprise servers and storage arrays where internal space is limited and reliable high-speed signal transfer is required.

Server Builders Needing SFF8654 4i to SFF8087

The cable suits technicians wiring RAID controllers or HBAs to backplanes in dense chassis where a straight connector would cause strain. It is not for installations that require a different target interface on the drive side or a different host connector than SFF8654 4i.

SFF8654 4i Host Connector

The single specification that decides fitment is the host-side SFF8654 4i SlimSAS 4.0 interface; the adapter only works when the controller or motherboard presents that exact port.

Highlights

  • Left-angled connector fits tight server chassis
  • SlimSAS 4.0 delivers high-bandwidth stable transmission
  • Left-angle design prevents cable bending damage
  • Server-grade shielding reduces signal loss and interference
  • Connects SFF-8654 4i to SFF-8087 for storage expansion

Specifications

No published specifications for this item yet.

Questions about this item

What bandwidth does the SlimSAS 4.0 connection actually deliver in a server?

The cable is built to the SlimSAS 4.0 specification, so it supports the full signalling rate of that standard for stable high‑bandwidth transmission between a RAID card and a backplane.

Which SAS standard does the SFF‑8087 end conform to, and what speed ceiling does that impose?

The SFF‑8087 connector follows the SAS interface, limiting the link to the SAS generation supported by the attached controller and backplane.

How much clearance does the left‑angle SFF‑8654 plug need inside a compact chassis?

The left‑angle design lets the cable run parallel to the board, fitting tight server enclosures where a straight connector would hit the side panel or adjacent cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.