We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SFF-8654 8i cable splitting to eight SATA connectors, 0.8 m length

SMUGDESK

SMUGDESK SFF8654 8I to 8×SATA SAS Cable .8m 24G 32AWG

SKU CH-HNQ7-KTS28

Converts one SFF8654 8I Slimline SAS port into eight SATA ports for high-density storage expansion

  • Converts one SFF8654 8I port to eight SATA drives for massive storage expansion
  • Full-housing anti-misplug design prevents reverse insertion protecting server hardware from damage
  • 32AWG pure copper conductors deliver stable 24G high-speed signal transmission with minimal interference
  • Compatible with RAID controllers enterprise servers workstations and NAS storage arrays
  • Optimised .8 metre length enables tidy internal routing in compact rackmount servers

SFF8654 8I to 8×SATA breakout cable

This cable converts a single SFF8654 8I Slimline SAS port into eight SATA connectors for multi‑drive storage expansion. It suits RAID controllers, enterprise servers, workstations and high‑density NAS deployments. The .8 metre length fits medium‑range internal routing in compact rackmount chassis. Builders needing more than eight drives or a different host interface should look elsewhere.

Full‑housing anti‑misplug design

The moulded full‑housing shroud prevents reverse insertion, protecting both the host port and attached drives from physical damage. This mechanical guard is especially valuable during dense backplane installs where blind‑mate connections are common. No software or firmware is bundled; the cable is purely a passive interconnect.

32AWG copper conductors at 24G

Premium 32AWG pure copper wire delivers stable 24G high‑speed signal transmission with minimal interference across all eight SATA links. The short .8 metre / 31.49 inch harness reduces slack, easing cable management inside tight server bays. Installers requiring longer runs or angled connectors will need a different harness.

Highlights

  • Converts one SFF8654 8I port to eight SATA drives for massive storage expansion
  • Full-housing anti-misplug design prevents reverse insertion protecting server hardware from damage
  • 32AWG pure copper conductors deliver stable 24G high-speed signal transmission with minimal interference
  • Compatible with RAID controllers enterprise servers workstations and NAS storage arrays
  • Optimised .8 metre length enables tidy internal routing in compact rackmount servers

Specifications

No published specifications for this item yet.

Questions about this item

Will the 32AWG copper conductors need replacement after extended server use?

The 32AWG pure copper conductors are built for stable 24G signal transmission and do not require scheduled replacement under normal operating conditions.

What limits sustained 24G throughput on the eight SATA ports?

The eight SATA ports share the single SFF8654 8I link, so aggregate bandwidth is capped at the 24G SAS lane rate rather than per-drive SATA speed.

Does the .8m harness generate noticeable heat or noise inside a rackmount chassis?

As a passive copper cable it produces no noise and negligible heat; the full-housing anti-misplug design simply ensures secure seating during all-day operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.