We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two SFF8087 to four SFF8482 SAS breakout cables with SATA power adapters, 3.3ft each

SMUGDESK

SMUGDESK SFF8087 to 4×SFF8482 SAS breakout cable with SATA power adapter, 1M/3.3FT, 2Pack

SKU CH-6PMX-8GNE1

Connects one MiniSAS port to four SAS drives with included power adapters for reliable RAID expansion

  • Converts one SFF8087 port into four SFF8482 connectors for multidrive expansion
  • Built-in SATA power adapter plus extra 4×4-pin cables deliver stable drive power
  • High-speed reliable data transfer for enterprise RAID arrays and server backplanes
  • 3 ft length enables flexible internal server wiring and clean cable routing
  • Server-grade shielding reduces signal loss, crosstalk and electromagnetic interference

Single-port breakout for four SAS or SATA drives

This MiniSAS breakout cable converts one SFF8087 host port into four independent SFF8482 connectors. It is designed for servers and storage arrays that need to attach multiple hard drives or SSDs to a single RAID controller or backplane. Each pack contains two cables for bulk deployment in data centre environments.

Suits administrators expanding internal drive counts

Builders who need to connect four SAS or SATA drives from one MiniSAS port will find the integrated SATA power adapter and extra four 4pin power cables simplify wiring. Systems that lack an SFF8087 host port or require a different drive interface cannot use this cable.

One SFF8087 port fans out to four SFF8482 connectors

The 1to4 breakout design is the specification that decides compatibility; the host side must present an SFF8087 MiniSAS interface and each target drive must accept an SFF8482 connection. Shielded construction supports steady highbandwidth data transmission across the 1M length.

Highlights

  • Converts one SFF8087 port into four SFF8482 connectors for multidrive expansion
  • Built-in SATA power adapter plus extra 4×4-pin cables deliver stable drive power
  • High-speed reliable data transfer for enterprise RAID arrays and server backplanes
  • 3 ft length enables flexible internal server wiring and clean cable routing
  • Server-grade shielding reduces signal loss, crosstalk and electromagnetic interference

Specifications

No published specifications for this item yet.

Questions about this item

Does my controller need an SFF8087 port to use this breakout cable?

Yes, the cable plugs into a single SFF8087 MiniSAS host port and fans out to four SFF8482 connectors for drives.

Can I connect older SATA hard drives to the four SFF8482 ends?

The SFF8482 connectors accept both SAS and SATA drives, so existing SATA drives will work alongside SAS drives.

How do I verify the drives are recognised after plugging in the cable?

Check the RAID controller BIOS or operating system disk utility to confirm all four drives appear with correct capacity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.