SMUGDESK
SMUGDESK SFF-8644 to SFF-8087 12Gbps 36Pin SAS Cable 1M
A 1 metre, 36-pin cable linking an external SFF-8644 port to an internal SFF-8087 port at 12 Gbps for RAID and backplane connections
- 12 Gbps bandwidth handles enterprise storage workloads
- SFF-8644 to SFF-8087 connects external enclosures to internal backplanes
- 1 metre length keeps cross-cabinet wiring tidy
- Full 36-pin pinout ensures complete signal integrity
- Metal locking latches prevent accidental disconnect under vibration
External-to-internal SAS bridge
This 1-metre cable connects an SFF-8644 external Mini SAS HD port to an SFF-8087 internal Mini SAS port, providing a direct link between JBOD expansion cabinets and server RAID controllers or backplanes. It targets administrators who need to extend storage arrays beyond the chassis without introducing protocol converters or active electronics.
When the jump is worth it
Replacing a shorter or unshielded assembly with this fully pinned 36-wire design restores the full 12Gbps SAS bandwidth that heavy 24/7 workloads demand. The upgrade pays off when existing cables limit throughput, exhibit intermittent errors under vibration, or lack the locking latch required for secure rack mounting.
Build integration
Double-layer aluminium foil and braided shielding around 100-ohm controlled-impedance copper cores keeps crosstalk out of dense cable runs, while metal locking buckles prevent accidental disconnects during maintenance. The 3.33-foot length spans adjacent racks cleanly, leaving airflow paths clear and eliminating the slack that traps heat in high-density deployments.
Highlights
- 12 Gbps bandwidth handles enterprise storage workloads
- SFF-8644 to SFF-8087 connects external enclosures to internal backplanes
- 1 metre length keeps cross-cabinet wiring tidy
- Full 36-pin pinout ensures complete signal integrity
- Metal locking latches prevent accidental disconnect under vibration
Specifications
No published specifications for this item yet.
Questions about this item
Which connectors does the 36-pin cable use to link an external enclosure to an internal backplane?
One end has an SFF-8644 Mini SAS HD plug and the other end has an SFF-8087 Mini SAS plug, both male with 36 pins.
What is the correct orientation when seating the metal locking buckles on the SFF-8644 and SFF-8087 ports?
Align each connector with its port, push straight in until the metal latch clicks, and verify the buckle sits flush so vibration cannot unseat it.
How often should the shielding and oxygen-free copper conductors be inspected in a 24/7 data-centre deployment?
Check the braided and foil shielding for crush damage and the connectors for dust every 12 months during scheduled maintenance windows.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
