We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1-meter SFF-8643 to four SFF-8482 SAS breakout cable with SATA power connectors

SMUGDESK

SMUGDESK SFF-8643 to 4× SFF-8482 SAS Cable with SATA Power, 1M

SKU CH-6HKK-24BTA

A 1-metre Mini SAS HD breakout cable splits one SFF-8643 host port into four SFF-8482 drive connectors with integrated SATA power for 2.5 or 3.5 SAS drives

  • Connect four SAS drives from one Mini SAS HD port using SFF-8643 to 4× SFF-8482 breakout
  • Power drives directly through integrated SATA power connectors without extra cables
  • 1-metre shielded cable keeps signal clean for reliable high-speed data transfer
  • Locking connectors stay secure in vibration-prone server and NAS chassis
  • Fits 2.5 and 3.5 SAS hard drives for flexible storage expansion

Mini SAS HD breakout cable

This 1-meter cable splits a single SFF-8643 Mini SAS HD host port into four independent SFF-8482 SAS drive connectors. Integrated SATA power ports supply each drive directly, removing the need for separate power cables during installation. Designed for internal server, NAS and workstation chassis, the shielded construction supports reliable high-speed data transmission under continuous load.

Suits RAID controller and backplane builds

Builders expanding multi-disk SAS storage arrays using RAID adapters or Mini SAS HD backplanes will find the pinout and power integration match their requirements. Buyers whose drives use native SATA data connectors or require a different drive interface should look at something else. The fixed breakout design does not support single-drive direct-attach scenarios.

SFF-8643 to four SFF-8482 with SATA power

The single specification that decides fit is the connector combination: one SFF-8643 host end breaking out to four SFF-8482 drive ends, each carrying an integrated SATA power interface. Verify that your controller presents an SFF-8643 port and your target drives accept SFF-8482 with SATA power before purchasing.

Highlights

  • Connect four SAS drives from one Mini SAS HD port using SFF-8643 to 4× SFF-8482 breakout
  • Power drives directly through integrated SATA power connectors without extra cables
  • 1-metre shielded cable keeps signal clean for reliable high-speed data transfer
  • Locking connectors stay secure in vibration-prone server and NAS chassis
  • Fits 2.5 and 3.5 SAS hard drives for flexible storage expansion

Specifications

No published specifications for this item yet.

Questions about this item

What does the SFF-8643 Mini SAS HD interface cap in practice?

The SFF-8643 Mini SAS HD host connector splits to four independent SFF-8482 drive connectors for SAS hard drives.

What physical space and drive bays does this cable need to fit?

The 1-metre length suits medium and large chassis; it connects to 2.5 or 3.5 SAS hard drives with SFF-8482 ports.

How is the integrated SATA power installed, and what step is often missed?

Plug the SATA power connectors into each drive; the step often missed is confirming every drive receives power before closing the case.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.