We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
0.5m SFF-8643 Mini SAS to four target-angle SATA breakout cable

SMUGDESK

SMUGDESK SFF-8643 Mini SAS to 4 SATA Breakout Cable .5m 1.6FT Target Angle

SKU CH-YK5S-XDXAF

A 0.5 m SFF-8643 Mini SAS to four target-angle SATA breakout cable for connecting RAID or HBA controllers to SATA drives in servers and NAS

  • Target-angle SATA plugs simplify routing in tight chassis
  • .5 m length fits standard server and NAS drive bays
  • Shielded construction reduces EMI for stable data transfer
  • Single SFF-8643 port fans out to four SATA drives
  • Supports RAID and HBA controllers for storage expansion

SFF-8643 breakout cable for four SATA drives

This 0.5 metre (1.6FT) cable connects an SFF-8643 Mini SAS controller or HBA to up to four SATA hard drives or SSDs. It is built for server, NAS and workstation chassis where internal space is limited and a direct controller-to-drive link is required. The assembly carries data signals only, so separate power cables must be provided for each drive.

Target-angle SATA plugs for tight routing

The four SATA connectors use a target-angle design that reduces cable torsion and eases routing in crowded drive bays. This orientation lessens mechanical stress on drive ports and helps maintain a tidy loom during continuous operation. Length is fixed at 0.5 metre, so the cable suits short runs between a controller card and adjacent drive cages.

Multi-layer shielded construction for signal

A multi-layer shielding structure suppresses electromagnetic interference to keep high-speed SAS data stable across the link. The integrated wiring harness keeps the four breakout tails organised from the single SFF-8643 plug, simplifying installation in RAID arrays and DIY storage builds. Verify that your controller presents an SFF-8643 interface before fitting.

Highlights

  • Target-angle SATA plugs simplify routing in tight chassis
  • .5 m length fits standard server and NAS drive bays
  • Shielded construction reduces EMI for stable data transfer
  • Single SFF-8643 port fans out to four SATA drives
  • Supports RAID and HBA controllers for storage expansion

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.5m SFF-8643 breakout cable reach drives in my older full-tower chassis?

The 0.5 meter length suits most internal server and workstation layouts; measure your controller-to-drive distance to confirm.

How can I verify the SFF-8643 to 4 SATA link is running at full speed after installation?

Check the RAID or HBA BIOS and operating-system drive listings for all four SATA devices at expected transfer rates.

Does the box include power cables for the four SATA drives?

The package contains only the data breakout cable; separate SATA power cables from your power supply are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.