We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8611 4i to 4i SAS cable, 39.37 inches, shielded connectors

SMUGDESK

SMUGDESK SFF-8611 4i to 4i SAS Cable 1m

SKU CH-4JS1-3CNFQ

SFF-8611 4i SAS cable links RAID controllers and SSD arrays with 1 metre shielded copper for low-latency server interconnects

  • Direct Oculink SFF-8611 4i to 4i point-to-point link for PCIe server interconnects
  • Ultra-high-speed PCIe transmission optimized for enterprise storage and data transfer
  • 37 inch (1 m) length supports flexible internal routing in server chassis
  • Precision-shielded design minimizes signal loss, crosstalk and electromagnetic interference
  • Compatible with RAID controllers, SSD arrays and mainstream high-performance servers

SMUGDESK SFF-8611 4i Cable

This PCIe Oculink cable provides a direct SFF-8611 4i to 4i point-to-point connection for server links. It is built for enterprise storage and high-speed data transfer inside compatible systems. The 39.37 inch length supports flexible internal routing in dense chassis. Precision shielding minimises signal loss and electromagnetic interference.

Suits RAID and SSD array links.

This cable suits administrators connecting RAID controllers or SSD arrays via internal Oculink ports. It fits server builds that require a 1 metre SFF-8611 4i link. It is not for external drive enclosures or chassis with different bulkhead connector types. Builders needing longer runs or alternative port interfaces should look at other cable options.

SFF-8611 4i connector decides fit

The single specification that decides compatibility is the SFF-8611 4i connector on both ends. Both the controller and the backplane or drive cage must present this exact interface. If either endpoint uses a different connector family, the cable will not mate. Verify the port designation on your hardware before purchasing.

Highlights

  • Direct Oculink SFF-8611 4i to 4i point-to-point link for PCIe server interconnects
  • Ultra-high-speed PCIe transmission optimized for enterprise storage and data transfer
  • 37 inch (1 m) length supports flexible internal routing in server chassis
  • Precision-shielded design minimizes signal loss, crosstalk and electromagnetic interference
  • Compatible with RAID controllers, SSD arrays and mainstream high-performance servers

Specifications

No published specifications for this item yet.

Questions about this item

Which SFF-8611 4i cable length should I pick for a typical server chassis?

The 39.37 inch (1m) length is designed for flexible internal routing inside dense server enclosures, keeping cable runs tidy without excess slack.

What does the PCIe Oculink SFF-8611 4i interface actually deliver once installed?

It provides a direct point-to-point PCIe link between RAID controllers or SSD arrays, using pure copper conductors and multilayer shielding for stable, low-latency signal delivery.

What standard does the SFF-8611 4i connector follow and what bandwidth does it support?

The cable follows the SAS SFF-8611 4i specification for PCIe-based server interconnects, optimized for enterprise storage and high-bandwidth data transfer.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.