We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8482 SAS to SATA adapter cable with 15Pin power connector

SMUGDESK

SMUGDESK SFF-8482 SAS to SATA Adapter Cord with 15Pin Power Interface Internal Connection Server Device

SKU CH-J999-R7VBB

Connects a SAS hard drive to a standard SATA motherboard port using an SFF-8482 adapter with a separate 15Pin power interface for stable operation

  • Connect SAS drives to standard SATA motherboard ports via SFF-8482 conversion
  • Independent 15Pin power interface supplies stable power to SAS hard disks
  • Reliable signal transmission enables normal drive identification and data access
  • Optimised internal wiring reduces signal interference inside the chassis
  • Professional accessory for server drive testing and industrial storage assembly

Connect SAS drives to SATA ports

This SFF-8482 adapter cable converts a SAS hard drive interface to a standard SATA data connector so the drive can be recognised by a regular motherboard. It is intended for server drive inspection, data recovery and storage testing tasks.

Check drive protocol and cable routing

Confirm that the specific SAS hard drive model supports operation through a SATA controller before ordering. Route the cable inside the chassis without sharp bends or tension to protect the internal conductors.

Independent 15Pin power and signal stability

A dedicated 15Pin power interface supplies the drive separately from the data path for stable operation. The optimised internal wiring reduces signal interference during continuous storage access.

Highlights

  • Connect SAS drives to standard SATA motherboard ports via SFF-8482 conversion
  • Independent 15Pin power interface supplies stable power to SAS hard disks
  • Reliable signal transmission enables normal drive identification and data access
  • Optimised internal wiring reduces signal interference inside the chassis
  • Professional accessory for server drive testing and industrial storage assembly

Specifications

No published specifications for this item yet.

Questions about this item

What connectors are included on the adapter cable and do I need to buy a separate power cable?

The adapter cable provides an SFF-8482 SAS data connector for the drive, a standard SATA data connector for the motherboard, and a 15Pin power interface; a matching power cable must be supplied separately.

My drive uses an SFF-8482 SAS interface — will this adapter work with it?

The cable is built for the SFF-8482 SAS interface found on many single-port SAS drives, converting it to a SATA data port while the 15Pin power interface feeds the drive; verify your specific drive model and protocol support before installing.

Once installed, what data transfer rate can I expect from this adapter?

The adapter passes the SAS drive's native signal through to the SATA motherboard port, so actual throughput depends on the drive and motherboard capabilities rather than the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.