We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8482 SAS 29-pin male to integrated SATA 22-pin connector cable

SMUGDESK

SMUGDESK SFF-8482 SAS 29Pin to SATA 22Pin Cable

SKU CH-6G3Q-MYGGW

Converts a 29-pin SAS connector to a 22-pin SATA data and power interface for 2.5 and 3.5 drives

  • Connects SAS controllers to SATA drives via integrated 22Pin interface
  • Transmits data and delivers power through single 22Pin SATA connector
  • Supports 2.5 and 3.5 SATA HDD or SSD installation
  • Simplifies internal wiring by removing separate power cables
  • Enables RAID arrays and NAS expansion with reliable signal transmission

SAS to SATA 22Pin Adapter Cable

The SMUGDESK cable converts an SFF-8482 29Pin SAS male connector into a single integrated 22Pin SATA interface that merges 7Pin data and 15Pin power. It enables a SAS controller or backplane to connect directly to a standard SATA hard drive or SSD without a separate power lead. The design targets RAID arrays, NAS expansion and storage servers where internal space is limited. Plug-and-play installation simplifies deployment in enclosures and workstations.

Suited for RAID and NAS Builders

Builders assembling RAID volumes, expanding NAS capacity or wiring surveillance storage will appreciate the combined data and power path that reduces cable count inside the chassis. The cable works with 2.5 and 3.5 SATA HDDs and SSDs attached to SAS controllers. It is not intended for installations that require a separate power source, multi-lane breakout cables, or direct attachment to a SATA-only host port.

29Pin SFF-8482 to 22Pin SATA Interface

The single decisive specification is the SFF-8482 29Pin SAS male plug converting to an integrated 22Pin SATA connector carrying both data and power. This exact interface determines whether the cable matches your controller and drive combination. Verify that your SAS controller provides the 29Pin port and that the target drive uses the standard 22Pin SATA receptacle before ordering.

Highlights

  • Connects SAS controllers to SATA drives via integrated 22Pin interface
  • Transmits data and delivers power through single 22Pin SATA connector
  • Supports 2.5 and 3.5 SATA HDD or SSD installation
  • Simplifies internal wiring by removing separate power cables
  • Enables RAID arrays and NAS expansion with reliable signal transmission

Specifications

No published specifications for this item yet.

Questions about this item

Will the SFF-8482 SAS 29Pin connector on this cable fit my older SAS controller card?

Yes, the 29-pin SFF-8482 male connector is the standard SAS drive interface, so it plugs directly into any SAS controller or backplane that uses the same port.

How can I verify the integrated 22Pin SATA connection is delivering both data and power to my drive?

The drive will spin up immediately and appear in the BIOS or OS without a separate 15-pin power cable attached, confirming the single connector supplies both signals.

Does the box include a separate 15-pin power cable or do I need to buy one for my 2.5 or 3.5 SATA drive?

No extra cable is required or included; the 22Pin SATA end merges 7-pin data and 15-pin power, so one connection handles both for 2.5 and 3.5 drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.