We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8482 SAS 29 pin to SATA 22 pin cable with 15 pin power connector

SMUGDESK

SMUGDESK SFF-8482 SAS 29 Pin to SATA 22Pin Cable with 15 Pin Power

SKU CH-6D43-2EEJ4

Converts SFF-8482 SAS 29Pin to SATA 22Pin with an extra 15Pin power port for stable RAID and server drive expansion

  • Connect SATA drives to SAS controllers via SFF-8482 29Pin interface
  • Dedicated 15Pin SATA power port ensures stable drive operation
  • Shielded construction reduces interference for reliable RAID performance
  • Flexible cable body simplifies internal routing in servers
  • Broad compatibility with SATA HDDs, SSDs and RAID cards

SFF-8482 SAS to SATA conversion cable

This cable converts an SFF-8482 29Pin SAS interface to a standard SATA 22Pin connector, letting you attach SATA hard drives or SSDs to SAS host adapters in servers, workstations and storage enclosures. It is built for RAID array expansion and continuous operation in data-storage environments.

Integrated 15 Pin SATA power port

Unlike basic adapters, this cable includes an independent 15 Pin SATA power connection so you can supply dedicated power to the drive, avoiding recognition failures caused by insufficient power from the host side. The extra port makes the jump worthwhile when your backplane or controller cannot deliver enough current for added disks.

Shielded design for chassis wiring

Optimised internal shielding reduces electromagnetic interference to maintain reliable signal transmission during long-term use. The flexible cable body supports tidy routing inside the chassis and works with SAS controllers, RAID cards, server mainboards and storage enclosures without additional configuration.

Highlights

  • Connect SATA drives to SAS controllers via SFF-8482 29Pin interface
  • Dedicated 15Pin SATA power port ensures stable drive operation
  • Shielded construction reduces interference for reliable RAID performance
  • Flexible cable body simplifies internal routing in servers
  • Broad compatibility with SATA HDDs, SSDs and RAID cards

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the SFF-8482 29 pin connector need to seat inside a server chassis?

The SFF-8482 29 pin end plugs directly into a SAS controller or backplane port; the flexible cable body allows neat routing in tight chassis spaces without forcing the connector.

How is the 15 pin SATA power port connected during installation, and what step is often missed?

A separate SATA power cable from the power supply must be plugged into the 15 pin port on the cable; the common mistake is leaving this unconnected, which starves the drive of power.

When should the cable be inspected or replaced in a continuously running RAID array?

Inspect the shielding and connectors during scheduled server maintenance; replace the cable if the jacket shows wear, connectors feel loose, or drives report intermittent errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.