We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8482 SAS 29+15Pin female to SATA 7Pin female adapter cable, 50cm length

SMUGDESK

SMUGDESK SFF-8482 SAS 29+15Pin to SATA 7Pin 50cm

SKU CH-2RBM-HQTJX

Converts a SAS SFF-8482 29+15Pin female port to SATA 7Pin female for drive testing and data access over 50cm

  • SFF-8482 29+15Pin female to SATA 7Pin female conversion enables direct SAS drive connection
  • 50cm length allows tidy cable routing inside server and storage cabinets
  • Stable signal transmission with anti-interference design supports reliable hard disk testing
  • Data-only cable design ensures correct interface use for storage diagnostics
  • Specialized adapter suits server maintenance, industrial storage assembly and hard disk detection

SAS adapter cable for server storage

This 50-centimetre SFF-8482 cable converts a 29+15Pin female SAS connector to a SATA 7Pin female interface. It enables direct data access between SAS hard drives and SATA storage equipment for testing, recovery and maintenance tasks. The short length keeps internal server wiring tidy and manageable.

Data-only connection with 50cm reach

The cable transmits data signals only and cannot supply power to attached drives. Stable transmission supports continuous read operations during diagnostics and industrial storage assembly. The fixed 50cm length provides sufficient slack for chassis routing without excess cable bulk.

Passive design for low-interference runs

Optimised internal wiring reduces signal interference during extended storage operations. As a passive adapter it draws no power and adds no active heat or noise to the system. Avoid sharp bends and forceful pulling to preserve internal conductor integrity over repeated use.

Highlights

  • SFF-8482 29+15Pin female to SATA 7Pin female conversion enables direct SAS drive connection
  • 50cm length allows tidy cable routing inside server and storage cabinets
  • Stable signal transmission with anti-interference design supports reliable hard disk testing
  • Data-only cable design ensures correct interface use for storage diagnostics
  • Specialized adapter suits server maintenance, industrial storage assembly and hard disk detection

Specifications

No published specifications for this item yet.

Questions about this item

Will the SFF-8482 29+15Pin connector fit my existing SAS backplane?

The cable uses a standard SFF-8482 29+15Pin female interface designed for SAS connections. Verify your backplane pin definition matches before installation.

How can I confirm the cable is passing data correctly after connecting a drive?

The drive should appear in the system BIOS or operating system disk utility. Stable signal transmission is supported by the anti-interference wiring design.

Does the box include a power adapter for the SATA drive?

No, this cable only transmits data and cannot supply power. A separate SATA power connection from the system is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.