Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SMUGDESK
Connects SFF-8087 Mini-SAS RAID or HBA controllers to 2.5 or 3.5 SATA HDDs and SSDs with 1 meter shielded, gold-plated cabling for stable high-speed data transfer
This SMUGDESK forward breakout cable connects a Mini-SAS RAID or HBA controller with an SFF-8087 port to up to four SATA hard drives or solid-state drives. It is built for internal storage expansion inside servers, NAS enclosures and surveillance recording systems requiring direct drive attachment.
Verify that your host controller card features an SFF-8087 Mini-SAS receptacle and supports forward breakout wiring to SATA targets. Confirm the target drives use standard SATA interfaces; this cable does not carry power, so each drive still requires a separate power connection from the system power supply.
Multi-layer shielding suppresses electromagnetic interference and signal crosstalk from adjacent components during 24/7 workloads. Gold-plated contact pins resist oxidation for reliable conductivity, while injection-molded connector shells reinforce the mating interface against vibration-induced disconnection. The 1 metre (3.3 feet) length allows tidy internal routing without restricting chassis airflow.
No published specifications for this item yet.
The package contains the 1 meter SFF‑8087 to SATA forward breakout cable itself. No additional adapters or brackets are needed — the four SATA connectors plug directly into 2.5 or 3.5 inch SATA HDDs or SSDs.
This model is only offered in the 1 meter (3.3 ft) length with a standard SFF‑8087 Mini‑SAS plug on the host side and four SATA plugs on the drive side. If your backplane or controller uses a different Mini‑SAS pinout or you need a longer run, a different cable would be required.
The cable passes the native SATA 6 Gb/s signal from each drive to the controller without adding latency. Sustained read/write speeds will match the limits of the individual SATA SSDs and the RAID/HBA card, not the cable itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?