We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1 metre SFF-8087 Mini SAS to four SATA breakout cable with moulded connectors

SMUGDESK

SMUGDESK SFF-8087 to SATA Breakout Cable 1M

SKU CH-DRSG-V8GVW

Connects a Mini SAS controller to four SATA drives with a shielded one-metre forward breakout cable

  • Standard forward breakout connects SFF-8087 controller to SATA drives
  • 1 metre length keeps server chassis tidy and airflow clear
  • Shielded construction with impedance control delivers stable high-speed data transmission
  • Injection-moulded connectors with gold-plated pins resist vibration and corrosion
  • Supports 24/7 operation in NAS, surveillance and storage arrays

Direct controller link

This SFF-8087 breakout cable connects a Mini SAS RAID or HBA controller directly to SATA hard drives and SSDs. The forward wiring specification matches the standard pinout for host-side connections. It suits builders assembling storage servers, NAS enclosures or surveillance recording systems.

Chassis-friendly routing

At 3.3 feet the cable provides enough reach for tidy routing inside a server case without leaving slack that blocks airflow. Shielded construction and controlled impedance reduce crosstalk in crowded drive bays. Molded connector shells and gold-plated pins resist vibration and oxidation during 24/7 operation.

Four-drive expansion headroom

Each cable breaks out one SFF-8087 port into four SATA data links, letting a single controller lane serve multiple drives. It handles typical hard-disk and SATA SSD workloads without packet loss. Builders needing more than four drives per controller will require additional cables or a card with extra ports.

Highlights

  • Standard forward breakout connects SFF-8087 controller to SATA drives
  • 1 metre length keeps server chassis tidy and airflow clear
  • Shielded construction with impedance control delivers stable high-speed data transmission
  • Injection-moulded connectors with gold-plated pins resist vibration and corrosion
  • Supports 24/7 operation in NAS, surveillance and storage arrays

Specifications

No published specifications for this item yet.

Questions about this item

What length of SFF-8087 to SATA cable keeps airflow clear in a server chassis?

The 1 meter (3.3 feet) length provides enough reach for tidy routing inside server cases and NAS enclosures without excess cable blocking airflow.

How does the cable handle heat and signal integrity during 24/7 operation?

Shielded construction with controlled impedance suppresses electromagnetic interference and crosstalk, while gold-plated pins resist oxidation for stable continuous transmission.

Which controller interface must the host system provide for this breakout cable?

The host end requires an SFF-8087 Mini-SAS port on a RAID or HBA controller card to connect SATA drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.