We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8087 Mini SAS to four 90-degree right-angle SATA breakout cable 3.3FT

SMUGDESK

SMUGDESK SFF-8087 to 4 SATA 90° Breakout Cable 3.3FT

SKU CH-ACDF-JRZCD

Connects a SAS RAID controller to four SATA drives using a 3.3FT Mini SAS 8087 breakout with 90-degree right-angle plugs for tight chassis space

  • Connect SAS RAID card to four SATA drives via SFF-8087 Mini SAS
  • 90-degree right-angle SATA plugs save chassis space and reduce cable strain
  • 3FT length suits internal wiring in servers, NAS and desktop storage
  • High-speed signal transmission supports HDD and SSD RAID array expansion
  • Compatible with SFF-8087 SAS controllers, SATA hard drives and solid-state drives

Connect SAS RAID to Four SATA Drives

This cable bridges a Mini SAS SFF-8087 controller port to four SATA hard drives or solid-state drives, enabling direct attachment for storage expansion or RAID array creation in servers, NAS units and desktop storage builds. It targets administrators and builders who need a simple, reliable link between a SAS RAID card and multiple SATA devices without additional backplanes. The forward breakout design keeps wiring tidy inside the chassis.

Check Controller Port and Drive Orientation

Verify that your RAID or HBA card presents a standard SFF-8087 Mini SAS receptacle before ordering. Confirm the drives use SATA data connectors and that a 90-degree right-angle plug suits the drive bay layout, as the angled heads point forward from the latch side. The 3.3FT overall length should reach from the controller slot to the furthest drive bay in your enclosure; measure the internal routing path to be sure.

Fits Tight Chassis and Frees Routing Space

The 90-degree SATA connectors sit flush against drive ports, reducing cable bend radius and relieving stress on both the drive and the backplane in compact servers or crowded workstation cases. This geometry leaves more room for airflow and adjacent cables, simplifying cable management in dense storage nodes. Plug-and-play operation means no driver installation, so the drives appear to the controller immediately for array configuration or JBOD use.

Highlights

  • Connect SAS RAID card to four SATA drives via SFF-8087 Mini SAS
  • 90-degree right-angle SATA plugs save chassis space and reduce cable strain
  • 3FT length suits internal wiring in servers, NAS and desktop storage
  • High-speed signal transmission supports HDD and SSD RAID array expansion
  • Compatible with SFF-8087 SAS controllers, SATA hard drives and solid-state drives

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the cable and do I need any extra parts?

The cable has an SFF-8087 Mini SAS connector on one end and four 90-degree right-angle SATA connectors on the other. No additional adapters are required to link a compatible SAS RAID controller to four SATA drives.

Which length should I pick for a typical server or NAS chassis?

The 3.3FT (1 metre) length is designed for internal wiring in servers, NAS enclosures and desktop storage builds, giving enough reach without excess slack.

What does the 90-degree SATA connector do once the cable is installed?

The right-angle SATA plugs save space inside the chassis, prevent sharp cable bends and reduce stress on the drive ports during operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.