We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal Mini SAS HD breakout cable with SFF8643 host connector fanning out to four 29pin SFF8482 target connectors

SMUGDESK

SMUGDESK SF012 Internal Mini SAS Cable SFF8643 to 4× SFF8482 6Gbps

SKU CH-DF42-3Z70N

Connects one SFF8643 host port to four SFF8482 drives at 6Gbps with double-shielded construction and locking clips

  • Connects four drives from one controller port using SFF8643 to 4× SFF8482 breakout
  • Delivers 6Gbps SAS 2.1 speed for reliable mass-storage read-write tasks
  • Double-shielded construction cuts EMI inside crowded server chassis for clean signals
  • Locking clips on every connector prevent accidental disconnect from vibration
  • Designed for internal server, NAS and RAID controller storage expansion projects

Server Storage Breakout Cable

The SMUGDESK SF012 is an internal Mini SAS HD breakout cable that connects a single SFF8643 host port on a RAID controller to four 29-pin SFF8482 target connectors. It enables one controller port to drive up to four SAS or SATA hard disk drives simultaneously for server and NAS storage expansion.

Double-Shielded Construction

A built-in double-shielded wire structure suppresses crosstalk and electromagnetic noise inside crowded server chassis to maintain clean signal transmission. Locking clips on each connector guarantee tight insertion and prevent accidental disconnection caused by equipment vibration during long-term runtime.

Suits RAID Array Builders

This cable suits IT maintainers, system integrators and DIY users expanding internal hard-disk capacity in rackmount servers, NAS devices or workstation storage projects. It is not for installations requiring a backplane-mounted SFF8643 interface, as the cable works only with controller-side ports.

Highlights

  • Connects four drives from one controller port using SFF8643 to 4× SFF8482 breakout
  • Delivers 6Gbps SAS 2.1 speed for reliable mass-storage read-write tasks
  • Double-shielded construction cuts EMI inside crowded server chassis for clean signals
  • Locking clips on every connector prevent accidental disconnect from vibration
  • Designed for internal server, NAS and RAID controller storage expansion projects

Specifications

No published specifications for this item yet.

Questions about this item

Will the SFF8643 connectors wear out and need replacement after repeated server maintenance?

The latching clips on each SFF8643 and SFF8482 connector are rated for standard server insertion cycles and do not have a published replacement interval.

What limits the 6Gbps throughput when four drives are active on this breakout cable?

The SAS 2.1 link shares the single SFF8643 host port bandwidth across all four SFF8482 target connections.

Does the double-shielded cable run hot or draw extra power during all-day RAID rebuilds?

The passive copper construction adds no active heat or power draw; only the drives and controller generate thermal load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.