We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black SATA data and power combo cable for 27 inch iMac A1312 Mid 2011

SMUGDESK

SMUGDESK SATA Data Power Combo Cable for 27inch iMac A1312 Mid 2011 Part 5931330 9229875

SKU CH-92ET-DPZ2G

Replaces the original SATA data and power cable in 27inch iMac A1312 Mid 2011, supporting 3.5inch HDD and 2.5inch SSD upgrades with factory-matched fit

  • Direct OEM replacement for 27-inch iMac A1312 Mid 2011 part 5931330
  • Combined SATA data and power cable supports 3.5-inch HDD and 2.5-inch SSD
  • Factory-matched length and routing installs without cutting or modification
  • High-temperature insulation ensures stable SATA 3Gbps transmission in closed chassis
  • Restores storage function when original cable is frayed or broken

Direct Replacement Cable

This SATA data and power combo cable is an exact replacement for the 27inch iMac A1312 Mid 2011, matching OEM part numbers 5931330 and 9229875. It integrates both signal and power lines into a single assembly designed for the original internal chassis layout. The factory-matched length and connector positioning allow direct installation without cutting or modification.

Internal Drive Upgraders

Technicians and DIY enthusiasts replacing a failed hard drive cable or upgrading to a 2.5inch SATA SSD in this specific iMac model will find the correct fit and high-temperature insulation suited to the closed chassis. The cable supports the original 3.5inch mechanical drive as well as 2.5inch SATA solid-state drives. Owners of any other iMac model or year cannot use this part, as it is not compatible with different internal layouts or connector configurations.

SATA 3Gbps Transmission

The cable is rated for stable SATA 3Gbps data transmission, which determines the maximum interface speed for the connected storage device. High-temperature resistant insulation maintains signal integrity inside the all-in-one enclosure during long-term operation. Verify that the target drive operates on the SATA interface before installation.

Highlights

  • Direct OEM replacement for 27-inch iMac A1312 Mid 2011 part 5931330
  • Combined SATA data and power cable supports 3.5-inch HDD and 2.5-inch SSD
  • Factory-matched length and routing installs without cutting or modification
  • High-temperature insulation ensures stable SATA 3Gbps transmission in closed chassis
  • Restores storage function when original cable is frayed or broken

Specifications

No published specifications for this item yet.

Questions about this item

Does the 5931330 cable fit the 27inch iMac A1312 Mid 2011 chassis without trimming?

Yes, the cable length and connector position match the original part so it routes inside the 27inch iMac A1312 Mid 2011 without cutting or modification.

Which step is most often missed when installing the 9229875 combo cable?

Reconnecting the integrated SATA data and power connectors in the correct orientation before reassembling the logic board; the allinone cable must seat fully on both the drive and the motherboard header.

Will the high temperature insulation on the 5931330 cable need replacement during the iMac's life?

The insulation is rated for the closed internal environment of the 27inch iMac A1312 Mid 2011 and does not require scheduled replacement under normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.