We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA power splitter cable, one male to six female connectors, 70cm length

SMUGDESK

SMUGDESK SATA 1-to-6 Power Splitter Cable 70cm

SKU CH-7QM8-B6S76

A 70 cm SATA cable splits one male 15-pin connector into six female ports for powering multiple hard drives, SSDs and optical drives

  • One SATA connector powers six drives
  • 70cm length fits large chassis layouts
  • Standard 15-pin SATA interface works with HDD, SSD and optical drives
  • High-quality copper wire keeps voltage stable
  • Locking connectors stay secure under vibration

1-to-6 SATA Power Splitter

This 15-pin SATA power splitter cable turns a single male connector into six female ports so one power lead can supply up to six storage devices. The 70-centimetre length gives enough reach for routing across large chassis while keeping cable clutter low. It is aimed at builders adding multiple 2.5-inch or 3.5-inch hard drives, SATA SSDs or optical drives without running extra wires from the power supply.

Tool-free installation with locking connectors

Each female port uses a standard locking SATA connector that clicks into place and resists vibration, so drives stay powered even when the case is moved. Simply plug the male end into an existing SATA power lead and attach the drives; no crimping or adapters are required. The main risk is exceeding the source lead’s current rating if too many high-draw mechanical drives spin up simultaneously, which can cause voltage drops or connector heating.

Check power budget and port count before ordering

Verify that your power supply has a free SATA power lead and that the combined start-up and running current of all attached drives stays within that lead’s specification. Confirm each target drive uses a 15-pin SATA power input rather than a different interface. Ensure the 70-centimetre reach suits your case layout and that you do not need more than six ports, as this splitter provides exactly six.

Highlights

  • One SATA connector powers six drives
  • 70cm length fits large chassis layouts
  • Standard 15-pin SATA interface works with HDD, SSD and optical drives
  • High-quality copper wire keeps voltage stable
  • Locking connectors stay secure under vibration

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the splitter is delivering stable power to all six SATA ports after installation?

Each drive should spin up and remain recognised in BIOS or the operating system without sudden disconnection or read errors during continuous use.

What connectors and cables are included, and is any additional wiring required?

The package contains the 70 cm 15-pin SATA male-to-six-female splitter cable; no extra wiring is needed for drives with standard 15-pin SATA power sockets.

Which version of the cable should I choose for a mix of 2.5-inch SSDs and 3.5-inch hard drives?

The single 70 cm 1-to-6 model supports both 2.5-inch and 3.5-inch drives through the same 15-pin SATA power interface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.