We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SAS 4.0 cable with four 90-degree SATA connectors

SMUGDESK

SMUGDESK SAS 4.0 4SATA to 4SATA 90° Cable

SKU CH-NP4X-F2T6H

SAS 4.0 cable connects four SATA drives with 90° angled latching connectors for tight chassis and RAID builds

  • 90° connectors relieve strain in tight chassis
  • SAS 4.0 cable links four SATA drives simultaneously
  • Latching plugs resist vibration in server environments
  • High-speed data path for multi-drive RAID builds
  • Pure hardware link needs no driver or software

Four-drive SAS 4.0 SATA cable

This SAS 4.0 compliant cable connects four SATA SSDs or HDDs to a motherboard or RAID controller simultaneously. The 90-degree bent connectors reduce strain in tight chassis spaces and server racks. Latching plugs provide vibration-resistant links for long-term operation. Shielded conductors maintain consistent data throughput without drivers.

Builders with multi-drive bays and RAID arrays

The four-channel design suits DIY multi-disk builds, homelab servers and NAS expansions where several drives sit close together. Users needing only a single drive connection should choose a different cable type. Installers without spare SATA power cables must source those separately because this product carries data only. Compact cases with no room for right-angle plugs gain no benefit from the bent ends.

SAS 4.0 four-channel data link

The cable implements the SAS 4.0 standard across four SATA lanes for stable high-speed transmission. Each connector includes a lock-in latch to prevent accidental disconnection during vibration. The 90-degree angle solves interference issues in cramped drive bays and multi-drive chassis. No software or driver installation is required for operation.

Highlights

  • 90° connectors relieve strain in tight chassis
  • SAS 4.0 cable links four SATA drives simultaneously
  • Latching plugs resist vibration in server environments
  • High-speed data path for multi-drive RAID builds
  • Pure hardware link needs no driver or software

Specifications

No published specifications for this item yet.

Questions about this item

Will the 90° bent connectors on this cable fit alongside my existing SATA cables in a crowded case?

The 90° bent SATA connectors are designed to relieve cable strain and solve interference issues inside compact cases and cramped drive bays.

How can I verify the SAS 4.0 cable is delivering stable high-speed transmission to all four drives after installation?

Confirm each drive is detected at full SATA speed in your BIOS or operating system and run a disk benchmark to verify consistent throughput across all four channels.

Does the box include the SATA power cables needed for the four drives, or must I buy them separately?

This is a data-only cable; separate SATA power cables are required to supply power to your hard drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.