We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Right-angled Mini SAS HD SFF8087 to four left-angled SATA 7-pin connectors, braided sleeve

SMUGDESK

SMUGDESK RightAngled Mini SAS HD SFF8087 to LeftAngled 4Port SATA 7Pin Breakout Cable

SKU CH-RXXC-7FMCW

Right-angled SFF-8087 to four left-angled SATA breakout cable supports SAS 3.0 at 12 Gbps per channel for RAID or HBA backplane connections

  • Right-angled SFF-8087 clears tight server chassis
  • 12 Gbps SAS 3.0 bandwidth per channel
  • Gold-plated locking latches prevent vibration disconnects
  • Braided sleeve reduces EMI and aids airflow
  • Forward breakout links RAID HBA to four SATA drives

RightAngled SFF8087 Breakout Cable

The SMUGDESK cable provides a rightangled Mini SAS HD SFF8087 host connector that splits into four leftangled SATA 7pin target ports. It is built for internal server and NAS chassis where straight connectors cannot fit. The 90degree design reduces stress on port solder joints during installation in dense rackmount enclosures. This forward breakout links RAID or HBA controllers directly to SATA drives or backplanes.

Suited For Compact SAS 3.0 Storage Builds

Installers working in tight 1U or 2U servers benefit from the angled connectors and braided sleeve that preserves airflow. The goldplated latched ends resist vibration induced disconnection in running cabinets. It is not suited for configurations that require power delivery through the cable or for direct attachment to drives lacking native SATA interfaces. Builders needing straight connectors or higher port counts should consider alternative cable geometries.

SAS 3.0 12Gbps Per Channel Throughput

Each of the four SATA channels operates at up to 12Gbps under the SAS 3.0 specification, sustaining stable readwrite performance across RAID arrays. The braided shielding limits electromagnetic interference that can degrade signal integrity at this speed. This bandwidth figure is the primary factor when matching the cable to controller and backplane capabilities.

Highlights

  • Right-angled SFF-8087 clears tight server chassis
  • 12 Gbps SAS 3.0 bandwidth per channel
  • Gold-plated locking latches prevent vibration disconnects
  • Braided sleeve reduces EMI and aids airflow
  • Forward breakout links RAID HBA to four SATA drives

Specifications

No published specifications for this item yet.

Questions about this item

Will the right-angled SFF-8087 connector clear the backplane in a 1U server?

The 90-degree host connector is designed for tight chassis so it routes close to the board and avoids the clearance issues straight plugs create in dense rackmount builds.

How can I confirm each drive is running at 12 Gbps after I connect the cable?

Check the RAID or HBA controller BIOS or management utility; it will report the negotiated link speed per port, which should show 12 Gbps on all four SATA channels when drives and backplane support SAS 3.0.

Does the package include mounting brackets or only the breakout cable itself?

Only the breakout cable is supplied — right-angled SFF-8087 to four left-angled SATA 7-pin connectors with gold-plated latched ends and a braided sleeve; no brackets, screws or additional hardware are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.