We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short shielded cable with combined eSATA USB plug and wide 22 pin SATA connector

SMUGDESK

SMUGDESK Power eSATA to SATA 22Pin Cable 0.5M

SKU CH-XD32-GD0FA

Connects a Power eSATA host port to a standard 22-pin SATA drive, supplying both 12V and 5V power plus data signal in a single .5 m shielded cable

  • Combines SATA signal and 12V/5V power in one cable
  • Converts Power eSATA host port to standard 22pin SATA interface
  • 5m shielded length keeps signal stable for desktop enclosures
  • Driver-free plug-and-play connection for external SATA HDD and SSD
  • Full power function requires genuine Power eSATA port, not standard eSATA

Power eSATA to SATA 22Pin Cable

This 0.5meter cable combines eSATA data signal with 12V and 5V power delivery in a single shielded cord. It converts a host Power eSATA port to a standard SATA 22pin interface for direct drive connection. The plugandplay design requires no drivers for external SATA HDD or SSD enclosures. Highquality shielding maintains stable signal integrity during data transfers.

For powered eSATA host ports only

Suits users with genuine Power eSATA (eSATA+USB) ports who need to power external SATA drives without separate AC adapters. Builders working on DIY external storage modifications will appreciate the compact length. Not for systems with standard eSATA ports that lack 12V/5V power output. Buyers needing longer cable runs for chassis routing should look at alternative lengths.

Verify host port specification first

Check that your host controller explicitly supports Power eSATA before ordering. Ordinary eSATA ports cannot supply the required 12V and 5V rails, so connected drives will not spin up. Ensure your external enclosure uses a standard SATA 22pin (7pin signal plus 15pin power) input connector. This cable does not function with nonpowered eSATA interfaces.

Highlights

  • Combines SATA signal and 12V/5V power in one cable
  • Converts Power eSATA host port to standard 22pin SATA interface
  • 5m shielded length keeps signal stable for desktop enclosures
  • Driver-free plug-and-play connection for external SATA HDD and SSD
  • Full power function requires genuine Power eSATA port, not standard eSATA

Specifications

No published specifications for this item yet.

Questions about this item

What type of host port must my computer have for this cable to supply both data and power to a drive?

It requires a genuine Power eSATA port that combines eSATA signal with USB 12V and 5V power output; a standard eSATA port will not spin up the drive.

Will this work if I connect it to a regular eSATA port on an older laptop or bracket?

No, ordinary eSATA ports cannot deliver the 12V and 5V power lines, so the attached SATA drive will not receive power and will fail to spin up.

How can I confirm the cable is delivering both signal and power after I plug it in?

The connected SATA drive should spin up immediately and appear in the operating system without any driver installation required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.