We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular PoE splitter with Ethernet ports and USB-C power output for Raspberry Pi 5

SMUGDESK

SMUGDESK PoE Splitter for Raspberry Pi 5 5V 4A USB-C Gigabit IEEE 802.3af/at Network Connector

SKU CH-PRAB-J9CFQ

Powers Raspberry Pi 5 with 5V 4A over a single Ethernet cable while keeping full 10/100/1000 Mbps network speed

  • Stable 5 V 4 A power for Raspberry Pi 5 via USB-C
  • Full gigabit 10/100/1000 Mbps Ethernet with zero speed loss
  • IEEE 802.3af/at compliant for standard PoE switches and injectors
  • Single Ethernet cable delivers both power and data, no separate adapter needed
  • Plug-and-play setup for home labs, embedded projects and remote Pi 5 deployment

Raspberry Pi 5 PoE Splitter

This SMUGDESK splitter delivers 5V 4A power and gigabit data to a Raspberry Pi 5 over a single Ethernet cable. It accepts IEEE 802.3af and 802.3at power from a PoE switch or injector and separates the signal into a USB-C power lead and a 10 100 1000Mbps network link. The compact unit is built for home labs, embedded projects and remote deployments where a separate power adapter is impractical.

Before you order

Verify that your PoE source is an active IEEE 802.3af or 802.3at device, as passive or non-standard injectors can damage the Pi 5. Confirm the switch or injector provides enough power budget to sustain the 5V 4A output under full peripheral load. Ensure you have a standard Ethernet cable for the PoE input and a short patch lead to connect the splitter data port to the Pi 5 LAN port.

Sustained load behaviour

The high-efficiency conversion circuit maintains stable 5V 4A delivery while preserving full gigabit throughput during continuous operation. This allows the Pi 5 and attached peripherals to run at full load without bandwidth degradation or voltage droop over long periods. The plug-and-play design requires no drivers, so the link remains reliable through extended uptime in servers, automation or surveillance roles.

Highlights

  • Stable 5 V 4 A power for Raspberry Pi 5 via USB-C
  • Full gigabit 10/100/1000 Mbps Ethernet with zero speed loss
  • IEEE 802.3af/at compliant for standard PoE switches and injectors
  • Single Ethernet cable delivers both power and data, no separate adapter needed
  • Plug-and-play setup for home labs, embedded projects and remote Pi 5 deployment

Specifications

No published specifications for this item yet.

Questions about this item

Does the splitter include any cables or a PoE injector, or must those be purchased separately?

The unit itself is the only item supplied; a standard Ethernet cable and an IEEE 802.3af/at compliant PoE switch or injector must be provided by the user.

Is there a choice of output voltages or current ratings for different Pi models?

No — the adapter is built specifically for Raspberry Pi 5 and delivers a fixed 5V 4A output via its USB-C connector.

Will the gigabit Ethernet port actually sustain 1000 Mbps throughput when the Pi 5 is under full load?

Yes, the splitter maintains full 10/100/1000 Mbps Ethernet performance with zero bandwidth loss while supplying 5V 4A power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.