We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK PCM2704 USB DAC decoder board with 3.5mm jack and S/PDIF output

SMUGDESK

SMUGDESK PCM2704 USB DAC Decoder Board Audio Adapter with 3.5mm Plug and Play

SKU CH-6PJR-S0TVH

A USB DAC decoder board with 3.5mm analog and S/PDIF digital outputs for desktop audio upgrades

  • Plug-and-play USB audio upgrade with no drivers needed
  • PCM2704 chip converts USB to analog and S/PDIF output
  • 5mm jack connects headphones or active speakers directly
  • S/PDIF digital output feeds external DAC for higher fidelity
  • Compact bare board fits DIY audio projects and enclosures

USB DAC decoder board with PCM2704 chip

This SMUGDESK board uses the PCM2704 chip to turn a USB port into an external sound card for desktop and laptop computers. It provides both a 3.5mm analog jack and S/PDIF digital output for connecting headphones, active speakers or an external DAC. The bare circuit board suits DIY audio projects and sound quality upgrades. No driver installation is required on most mainstream operating systems.

Check USB port and audio selection before ordering

Verify your computer has a free USB port for bus power and data. The board draws power directly from USB with no separate adapter needed. After plugging it in, you must switch the system output device to the PCM2704 USB audio device in sound settings. Note that this module does not support audio recording functions. Handle with static protection during installation.

Sustained playback via USB bus power

The decoder runs continuously from USB bus power without an external supply, so output stability depends on the host port delivering clean voltage. Analog and S/PDIF outputs maintain common sampling rates during extended music or media sessions. The bare board design has no enclosure, so keep it away from conductive surfaces and ensure adequate airflow around the PCB during long use.

Highlights

  • Plug-and-play USB audio upgrade with no drivers needed
  • PCM2704 chip converts USB to analog and S/PDIF output
  • 5mm jack connects headphones or active speakers directly
  • S/PDIF digital output feeds external DAC for higher fidelity
  • Compact bare board fits DIY audio projects and enclosures

Specifications

No published specifications for this item yet.

Questions about this item

Does the board come with a case, cables or power supply, or do I need to buy them separately?

The board is supplied as a bare circuit board only; no enclosure, USB cable or external power supply is included. It draws power directly from the USB port.

The description mentions both a 3.5mm jack and an S/PDIF output — which one should I use for my setup?

Use the 3.5mm jack for headphones, powered speakers or an amplifier with analogue input; use the S/PDIF output to feed a pure digital signal to an external DAC or digital-input amplifier.

What does the PCM2704 chip actually deliver when the board is plugged into my computer?

The PCM2704 converts the USB audio stream into analogue output at the 3.5mm jack and a simultaneous S/PDIF digital output, supporting common sampling rates for music and media playback without driver installation on most systems.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.