SMUGDESK
SMUGDESK PCIe Slimline SAS SFF8654 8i to 8×SATA 90° Cable .8M 24Gbps 32AWG
High-density breakout cable converts a single SFF8654 8i Slimline SAS port into eight 90° SATA ports with 24Gbps 8-channel bandwidth for compact server storage
- Converts one Slimline SAS 8i port into eight SATA drives
- 24Gbps bandwidth across eight channels for multi-drive arrays
- 32AWG copper reduces signal loss for stable long-term use
- 90° SATA connectors save space in tight server chassis
- .8M length allows flexible routing in dense storage enclosures
Enterprise breakout cable
This 0.8M harness converts a single SFF8654 8i Slimline SAS host port into eight independent 90degree SATA connections. It targets system integrators and administrators expanding enterprise RAID arrays, data center storage or compact server builds with multiharddrive connectivity.
24Gbps 8channel bandwidth
The cable supports 24Gbps ultrahighspeed parallel data transmission across eight channels, which is the single specification that determines whether the part matches the controller and backplane throughput requirements for highdensity storage expansion.
90degree SATA connectors ease routing
Angled plugs save internal space in tight backplane layouts and compact rackmount servers, while 32AWG lowloss copper reduces signal attenuation and crosstalk. Installers should verify the SFF8654 8i port pinout matches their RAID controller because mismatched pin assignments are the most common cause of link failures.
Highlights
- Converts one Slimline SAS 8i port into eight SATA drives
- 24Gbps bandwidth across eight channels for multi-drive arrays
- 32AWG copper reduces signal loss for stable long-term use
- 90° SATA connectors save space in tight server chassis
- .8M length allows flexible routing in dense storage enclosures
Specifications
No published specifications for this item yet.
Questions about this item
What does the 24Gbps rating mean when the cable is installed in a server?
The 24Gbps rating provides 8channel parallel bandwidth so each connected drive can sustain full SAS throughput without bottlenecking the host port.
Which interface standard does the SFF8654 8i connector follow and what does it limit?
The SFF8654 8i connector follows the SAS interface and caps total throughput at 24Gbps across all eight lanes.
How much clearance do the 90degree SATA plugs need behind the drive backplane?
The 90degree SATA connectors are designed for tight backplane layouts, letting the cable run parallel to the drive bay instead of projecting straight out.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



