SMUGDESK
SMUGDESK OCuLink SFF8611 4i to SAS 4×SFF8482 Cable with 4Pin Power .5m 12Gbps
Converts an OCuLink SFF8611 4i port to four SAS SFF8482 drives with integrated 4-pin power, delivering 12Gbps bandwidth in a compact .5m length for dense server builds
- Converts OCuLink SFF8611 4i to four SAS SFF8482 ports for multidrive storage expansion
- Integrated 4pin power connector delivers stable power to SAS drives, simplifying internal server wiring
- 12Gbps highspeed data transfer supports SAS HDDs, SSDs and RAID arrays under heavy workloads
- .5m compact length enables tidy cable routing inside highdensity rack servers and compact workstations
- Wide compatibility with SAS hard drives, RAID controllers, JBOD enclosures and industrial storage systems
OCuLink SFF8611 4i to 4×SAS SFF8482 cable
This cable adapts a single OCuLink SFF8611 4i port into four SFF8482 SAS drive connectors for multi-drive storage expansion. It is built for administrators and integrators adding SAS HDDs or SSDs to RAID controllers, JBOD enclosures or enterprise servers. The integrated 4-pin power connector feeds drives directly from the host system. The .5 metre length suits high-density chassis where space is limited.
Build integration: what it needs and frees up
The cable requires an available OCuLink SFF8611 4i interface on a RAID controller or motherboard and a free 4-pin power header from the power supply. It eliminates separate drive power cables by delivering power through the same assembly, reducing internal clutter. Four SAS drives connect through one compact link, freeing additional host ports for other devices. The short run keeps routing tidy inside rackmount servers and compact workstations.
Thermals, noise and power draw
Passive shielded conductors carry 12Gbps signals without active components, so the cable adds no fan noise or heat of its own. Power for the attached SAS drives travels through the 4-pin connector, drawing from the system supply rather than a separate adapter. The low-loss design maintains signal integrity under heavy RAID workloads without generating measurable thermal load. No moving parts mean silent operation in any enclosure.
Highlights
- Converts OCuLink SFF8611 4i to four SAS SFF8482 ports for multidrive storage expansion
- Integrated 4pin power connector delivers stable power to SAS drives, simplifying internal server wiring
- 12Gbps highspeed data transfer supports SAS HDDs, SSDs and RAID arrays under heavy workloads
- .5m compact length enables tidy cable routing inside highdensity rack servers and compact workstations
- Wide compatibility with SAS hard drives, RAID controllers, JBOD enclosures and industrial storage systems
Specifications
No published specifications for this item yet.
Questions about this item
Will the 0.5 metre length reach from my OCuLink SFF8611 4i port to the farthest drive bay?
The cable is 0.5 metre (19.68 in) long, so it suits compact chassis where the OCuLink port sits close to the SAS backplane; measure your routing path before ordering.
Does the 4-pin power connector draw enough current for four SAS drives under continuous load?
The integrated 4-pin power connector is designed to supply stable power to the attached SAS hard drives, simplifying internal wiring for multidrive arrays.
Do I need a RAID controller with an OCuLink SFF8611 4i port to use this cable?
Yes, the cable connects an OCuLink SFF8611 4i host port to four SFF8482 SAS drives, so the host must provide that specific OCuLink interface.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
