We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
100cm Oculink SFF-8611 to Mini SAS SFF-8611 4i cable with latching connectors

SMUGDESK

SMUGDESK Oculink SFF-8611 to Mini SAS SFF-8611 4i 100cm sas cable

SKU CH-Y133-G5F4K

Connects PCIe Oculink host adapters to Mini SAS SFF-8611 4i backplanes with 100 cm shielded cable and locking connectors

  • 100 cm length fits full-height server chassis routing
  • Multi-layer shielding blocks EMI and crosstalk for stable data transfer
  • Latching connectors lock securely to prevent vibration disconnects
  • Direct Oculink SFF-8611 to Mini SAS SFF-8611 4i link for host-to-backplane wiring
  • Compatible with Supermicro, Dell, HP and Lenovo enterprise platforms

100 cm SFF-8611 interconnect cable

This 100 cm cable connects a PCIe Oculink SFF-8611 host adapter or RAID controller to a Mini SAS SFF-8611 4i storage backplane or drive enclosure. It is built for internal wiring in enterprise servers, storage arrays and high-performance workstations. Multi-layer shielding suppresses EMI and crosstalk for stable signal quality under heavy workloads. Latching connectors lock securely to prevent accidental disconnection in vibration-prone chassis.

Verify host port and backplane connector type

Confirm that your host controller presents an Oculink SFF-8611 interface and that the target backplane or enclosure uses a Mini SAS SFF-8611 4i port. Check that the 100 cm length suits the internal routing path between the two devices inside your specific chassis. Ensure the cable jacket flexibility is adequate for the available cable-management space and bend-radius constraints.

Links controller to backplane in dense chassis

The cable bridges the host adapter and the storage backplane, freeing expansion slots that would otherwise be occupied by a direct-attached card. Shielding maintains signal integrity alongside power cables and other hardware in tightly packed server builds. Locking connectors keep the link reliable during long-term operation without requiring additional retention hardware. Not for builders who need an external port or a different connector standard.

Highlights

  • 100 cm length fits full-height server chassis routing
  • Multi-layer shielding blocks EMI and crosstalk for stable data transfer
  • Latching connectors lock securely to prevent vibration disconnects
  • Direct Oculink SFF-8611 to Mini SAS SFF-8611 4i link for host-to-backplane wiring
  • Compatible with Supermicro, Dell, HP and Lenovo enterprise platforms

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the cable and do I need any adapters to plug it in?

The cable has an Oculink SFF-8611 connector on one end and a Mini SAS SFF-8611 4i connector on the other, so it plugs directly into matching host adapters and backplanes without extra adapters.

How do I choose between different lengths or versions of this cable?

This listing is for the 100cm length only; select it when your host adapter and backplane are spaced for a one-metre internal run.

What real-world speed will I see when the cable is installed in a server?

The multi-layer shielding and locking connectors maintain stable high-speed SAS signal quality under continuous heavy workloads inside dense chassis.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.