We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50cm active cable with SFF-8611 4i and SFF-8087 36-pin latch-lock connectors, gold-plated contacts

SMUGDESK

SMUGDESK OCuLink SFF-8611 4i to SFF-8087 36Pin Active Cable 50cm

SKU CH-25QV-Y7D3R

Active 50 cm cable links OCuLink SFF-8611 4i to SFF-8087 36-pin for 12 Gbps SAS storage backplanes with latch-lock connectors

  • Active signal conditioning stabilises PCIe transmission up to 12Gbps
  • Latch-lock connectors resist vibration-caused disconnection
  • 50cm flexible cable simplifies routing in compact builds
  • Gold-plated contacts cut signal attenuation and EMI
  • Compatible with server boards, RAID HBA and slimline SSD modules

OCuLink SFF-8611 to SFF-8087 active cable

This 50 cm active cable connects an OCuLink SFF-8611 4i host port to a 36-pin SFF-8087 backplane or controller. Built-in signal conditioning supports PCIe Gen3 and Gen4 links at up to 12 Gbps. Gold-plated contacts and latch-lock connectors reduce signal loss and resist vibration in dense chassis.

Replaces passive copper links at 12 Gbps

Passive cables often fail to maintain signal integrity at 12 Gbps over internal routing distances. The active design compensates attenuation so Gen3 and Gen4 storage traffic remains stable. The upgrade is worth it when vibration, tight bends or longer runs cause link errors or dropped drives with passive assemblies.

Suits server and workstation backplane builds

System integrators wiring slimline SSD arrays or SAS backplanes inside Supermicro, ASUS or Gigabyte platforms will find the latch-lock ends and flexible jacket practical. Buyers who need external Mini-SAS HD, U.2 or M.2 direct connections should look at a different cable family.

Highlights

  • Active signal conditioning stabilises PCIe transmission up to 12Gbps
  • Latch-lock connectors resist vibration-caused disconnection
  • 50cm flexible cable simplifies routing in compact builds
  • Gold-plated contacts cut signal attenuation and EMI
  • Compatible with server boards, RAID HBA and slimline SSD modules

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 50cm active cable need for the latch-lock SFF-8611 4i and SFF-8087 36Pin connectors?

The latch-lock SFF-8611 4i and SFF-8087 36Pin connectors require enough depth for the locking latches to engage fully; the 50cm flexible jacket allows tight bends but keep the latch area clear of chassis walls or drive cages.

How is the active cable installed and what step is often missed?

Insert the SFF-8611 4i end into the OCuLink host port and the SFF-8087 36Pin end into the backplane until both latch locks click; the step often missed is verifying both latches are fully seated, not just the plug body.

When should the active cable be replaced in a SAS backplane setup?

Replace the cable if latch locks no longer click securely, if the jacket shows kinks that affect the active signal conditioning, or if intermittent link errors appear on the SAS backplane under sustained 12Gbps loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.