We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OCuLink SFF8611 to SAS HD SFF8644 4i cable 1 meter

SMUGDESK

SMUGDESK OCuLink 4i SFF8611 to SAS HD SFF8644 4i Cable 1M

SKU CH-C90H-CZBRQ

Connects OCuLink 4i SFF8611 to SAS HD SFF8644 4i for 12Gbps storage links in servers and workstations

  • 12Gbps bandwidth for high-speed SAS storage transfers
  • Connects OCuLink 4i SFF8611 to SAS HD SFF8644 4i interfaces
  • Precision shielding reduces signal crosstalk and attenuation
  • Compatible with servers, workstations and JBOD expansion systems
  • 1-metre length enables neat internal and external routing

Mixed-standard storage cable

This SMUGDESK cable connects an OCuLink 4i SFF8611 port to a SAS HD SFF8644 4i port, enabling direct links between different high-speed storage interfaces. It is built for administrators integrating mixed-connector environments in servers, workstations and JBOD expansion units. Precision shielding and low-loss conductors maintain signal integrity across the 1m run. The assembly supports steady 12Gbps bandwidth for enterprise storage arrays and RAID controllers.

Suited for cross-connector SAS deployments

This cable fits builders who need to bridge OCuLink 4i and SAS HD SFF8644 4i interfaces in rackmount or workstation chassis. It is not for installations that require a different connector pairing or a longer reach than 1m. Buyers using single-standard cabling end-to-end will not need this adapter cable. The design targets mixed-standard topologies where both interface types are present.

12Gbps SAS bandwidth rating

The single specification that decides fit is the rated 12Gbps transfer rate across the OCuLink 4i SFF8611 to SAS HD SFF8644 4i link. This throughput level matches enterprise SAS HDDs, SSDs and RAID controller ports operating at that speed grade. Verify that both host and target devices support 12Gbps SAS operation before deployment. The 1m length is optimised for internal or short external routing in standard rack environments.

Highlights

  • 12Gbps bandwidth for high-speed SAS storage transfers
  • Connects OCuLink 4i SFF8611 to SAS HD SFF8644 4i interfaces
  • Precision shielding reduces signal crosstalk and attenuation
  • Compatible with servers, workstations and JBOD expansion systems
  • 1-metre length enables neat internal and external routing

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 1 meter length for my rackmount server?

The 1 meter (39.37 in) cable is optimized for neat internal or external routing inside standard rackmount chassis, keeping cable runs tidy without excess slack.

What does the 12 Gbps rating mean when the cable is installed?

It delivers a steady 12 Gbps bandwidth across the link, so SAS HDDs, SSDs and RAID controllers can transfer data at full protocol speed without signal loss.

Which connectors does this cable join and what standard does it cap at?

It bridges OCuLink 4i SFF‑8611 to SAS HD SFF‑8644 4i and caps the connection at the SAS 12 Gbps limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.