We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
One metre Mini SAS cable, SFF8643 to SFF8087 connectors, shielded, locking ends

SMUGDESK

SMUGDESK Mini SAS SFF8643 to SFF8087 Cable 1M 12Gbps

SKU CH-H9RX-72Q3C

Connects 12Gbps RAID controllers to SFF8087 backplanes with shielded 1m cable and locking SFF8643 plugs

  • 12Gbps SAS bandwidth with 6Gbps backward compatibility
  • Full shielding suppresses EMI for stable 24/7 server operation
  • Latching SFF8643 to SFF8087 connectors prevent accidental disconnection
  • 1m internal cable links RAID cards to drive backplanes
  • Driver-free plug-and-play simplifies storage array installation

Target hardware and use

This one metre cable connects a SFF8643 male port to a SFF8087 male port inside servers and storage enclosures. It is built for RAID array controller cards, hard drive backplanes and NAS cabinets that require a direct SAS link. Buyers who need a different connector pairing or an external cable will not be served by this part.

Sustained signal integrity

The fully shielded construction suppresses electromagnetic interference so the link remains stable during continuous heavy load operation. Rated for native 12Gbps SAS bandwidth, it also runs at 6Gbps when connected to slower hardware without signal degradation. Locking latches prevent disconnection caused by chassis vibration over long uptime periods.

Installation notes

No driver or software configuration is required; the cable is a hardware plug and play component. Precise pin to pin wiring preserves signal integrity for multi disk RAID groups. Verify that both the controller card and the backplane provide the correct SFF8643 and SFF8087 interfaces before fitting, as mismatched ports are the typical cause of connection failure.

Highlights

  • 12Gbps SAS bandwidth with 6Gbps backward compatibility
  • Full shielding suppresses EMI for stable 24/7 server operation
  • Latching SFF8643 to SFF8087 connectors prevent accidental disconnection
  • 1m internal cable links RAID cards to drive backplanes
  • Driver-free plug-and-play simplifies storage array installation

Specifications

No published specifications for this item yet.

Questions about this item

Does the 12Gbps Mini SAS cable run hot or draw extra power when the server runs 24/7?

The fully shielded design suppresses EMI and maintains signal integrity for continuous 24/7 operation without added heat or power draw.

Which ports must my RAID card and backplane already have for this SFF8643 to SFF8087 cable to plug in?

One side needs an SFF8643 male port, the other an SFF8087 male port — both standard on enterprise RAID controllers and drive backplanes.

Will this 12Gbps SAS cable work with the 6Gbps backplane I already use in my older chassis?

Yes, it is backward compatible with 6Gbps SAS hardware, so the same cord links new 12Gbps RAID cards to legacy 6Gbps backplanes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.