We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal Mini SAS SFF8087 fanout cable to four 29pin SFF8482 connectors with SATA power, 3.3ft

SMUGDESK

SMUGDESK Mini SAS SFF8087 to 4×29Pin SFF8482 SAS Cable with SATA Power 1M 3.3FT

SKU CH-4Q11-PZ0B6

Internal fanout cable connects one SFF8087 Mini SAS port to four 29pin SFF8482 drive connectors with integrated SATA power for multidrive server and RAID storage deployments

  • Converts one SFF8087 port to four 29pin SFF8482 drive connectors
  • Integrated SATA power feeds drives directly for simpler internal wiring
  • High-quality copper wire sustains fast SAS data rates for RAID and enterprise storage
  • Flexible 1M / 3.3FT design routes cleanly inside rackmount servers and NAS enclosures
  • Single cable handles both data and power for multidrive storage deployments

Mini SAS Fanout Cable

This internal cable converts a single SFF8087 Mini SAS host port into four 29pin SFF8482 drive connectors. It targets system builders and IT administrators wiring SAS or SATA hard drives inside rackmount servers, NAS enclosures or storage backplanes. The integrated SATA power leads supply drives directly, reducing the number of separate power cables required.

Replaces Separate Data and Power Looms

The fanout design replaces individual SAS data cables and discrete SATA power runs with one assembled harness. The jump is worthwhile when populating multi drive bays where cable count and routing space are at a premium. It suits upgrades from single drive connections to consolidated four drive configurations without adding extra host ports.

Handles Four Drive Arrays

The 1M length provides sufficient reach for medium distance connections across typical chassis depths. High quality copper conductors support high speed SAS data transfer for enterprise storage and RAID systems. The assembly runs out when more than four drives must attach to one Mini SAS port or when longer runs exceed the supplied cable length.

Highlights

  • Converts one SFF8087 port to four 29pin SFF8482 drive connectors
  • Integrated SATA power feeds drives directly for simpler internal wiring
  • High-quality copper wire sustains fast SAS data rates for RAID and enterprise storage
  • Flexible 1M / 3.3FT design routes cleanly inside rackmount servers and NAS enclosures
  • Single cable handles both data and power for multidrive storage deployments

Specifications

No published specifications for this item yet.

Questions about this item

What width clearance does the SFF8087 connector need on the host side?

The SFF8087 Mini SAS plug fits a standard internal backplane slot; allow enough depth for the latch to seat fully.

Which step is often missed when seating the four SFF8482 drive connectors?

Each 29pin SFF8482 connector must click into its drive port and the integrated SATA power lead must be plugged into the same drive.

When should the SATA power leads be inspected or replaced?

Check the SATA power connectors during any drive swap; replace the cable if pins are bent, insulation is cracked or contacts show corrosion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.