We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK .5M Mini SAS SFF8087 straight to left-angle cable, black connectors

SMUGDESK

SMUGDESK Mini SAS SFF8087 Straight to LeftAngle Cable .5M 12Gbps

SKU CH-QH7S-S7N6A

A .5M 12Gbps SAS cable with straight and left-angled SFF8087 connectors for space-saving internal server routing

  • Left-angled connector saves space in tight server bays
  • 12Gbps SAS throughput keeps RAID arrays running at full speed
  • Impedance-controlled wiring cuts signal loss and EMI for stable links
  • .5M length fits short internal runs in small-form-factor builds
  • Straight-to-angled SFF8087 ends plug directly into controllers and backplanes

Internal SAS cable for compact servers

This .5M Mini SAS SFF8087 cable connects RAID controllers and drive backplanes inside space-constrained chassis. The straight-to-left-angle design keeps routing tidy where room is limited. It targets builders assembling small-form-factor servers, NAS units or dense storage enclosures. Reliable 12Gbps bandwidth supports demanding enterprise workloads.

Replaces longer or straight-only cables

The angled connector solves clearance issues that straight plugs cannot, letting the cable fold against the backplane or card edge. Upgrade when existing cables block airflow, stress ports or prevent the chassis lid from closing. The short .5M length eliminates slack that degrades signal quality in tight builds. No benefit if your chassis has ample straight-run space.

Fits standard SFF8087 ports on controllers

Impedance-controlled wiring reduces attenuation and EMI for stable links across the 12Gbps channel. The plug-and-play construction requires no drivers or configuration. It frees up internal volume for additional drives or better cooling. Buyers needing right-angle bends, external ports or lengths beyond .5M will need a different cable.

Highlights

  • Left-angled connector saves space in tight server bays
  • 12Gbps SAS throughput keeps RAID arrays running at full speed
  • Impedance-controlled wiring cuts signal loss and EMI for stable links
  • .5M length fits short internal runs in small-form-factor builds
  • Straight-to-angled SFF8087 ends plug directly into controllers and backplanes

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the left-angled SFF8087 connector need inside a compact server chassis?

The left-angled SFF8087 connector is designed for space-saving routing in tight server enclosures, allowing the cable to run parallel to the backplane or motherboard with minimal bend radius.

How do I correctly orient the straight and left-angled SFF8087 ends during installation?

Align the keyed straight SFF8087 end with the controller port and the left-angled SFF8087 end with the backplane port; the angled hood must point toward the chassis wall to avoid stress on the latch.

When should I consider replacing this .5M 12Gbps SAS cable in a production server?

Replace the cable if you see intermittent drive drops, CRC errors in the RAID log, or physical damage to the SFF8087 latch or wiring after repeated reseating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.