We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two Mini SAS SFF-8643 to four SFF-8482 breakout cables with SATA power branches, .5m each

SMUGDESK

SMUGDESK Mini SAS SFF-8643 to 4 SFF-8482 Cable with SATA Power .5m 2-Pack

SKU CH-WVHT-CPH1D

Connects one SFF-8643 port to four SFF-8482 drives with integrated SATA power, .5 m length reduces chassis clutter, 2-pack suits multi-server deployments

  • .5m length keeps server cabinets tidy and improves airflow
  • SFF-8643 to four SFF-8482 ports connects four SAS drives from one controller
  • Integrated SATA power feeds 2.5 and 3.5 inch drives without extra cables
  • Double shielding blocks electromagnetic interference for stable data transfer
  • 2-pack supplies cables for multi-server deployments or spare replacements

Server SAS breakout cable

This 0.5 metre Mini SAS SFF-8643 cable splits into four SFF-8482 connectors, letting you attach four SAS hard drives to a single controller port. A built-in SATA power branch supplies electricity to 2.5-inch and 3.5-inch drives without extra splitters. The pack contains two cables for multi-server deployments or spare inventory. No drivers are required for installation.

Practical length and shielding limits

At 0.5 metres (1.6 feet) the cable reduces excess wiring inside the chassis, improving airflow and easing future troubleshooting. Double shielding blocks electromagnetic noise to maintain signal integrity during continuous 24-hour operation. The fixed length restricts drive placement to positions within that reach from the controller.

Compatibility checks before ordering

Verify that your RAID controller or HBA provides an SFF-8643 Mini SAS port and that the target drives use SFF-8482 connectors. Confirm the chassis has space for the SATA power branch to reach a motherboard or power-supply header. Ensure the server backplane or drive tray accepts the quad-connector layout without mechanical interference.

Highlights

  • .5m length keeps server cabinets tidy and improves airflow
  • SFF-8643 to four SFF-8482 ports connects four SAS drives from one controller
  • Integrated SATA power feeds 2.5 and 3.5 inch drives without extra cables
  • Double shielding blocks electromagnetic interference for stable data transfer
  • 2-pack supplies cables for multi-server deployments or spare replacements

Specifications

No published specifications for this item yet.

Questions about this item

How many drives can I connect with one SFF-8643 to 4 SFF-8482 cable?

Each cable splits a single SFF-8643 port into four SFF-8482 connectors, so one cable supports up to four SAS drives simultaneously.

What does the 0.5 m length mean for airflow and cable management inside a server?

The short 0.5 m run keeps excess wiring out of the airflow path, making it easier to route cables cleanly and maintain proper cooling in dense chassis.

Does the SATA power branch on this SFF-8643 breakout cable supply both 2.5-inch and 3.5-inch SAS drives?

Yes, the integrated SATA power connector delivers power suitable for both 2.5-inch and 3.5-inch SAS hard disks without needing a separate splitter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.