We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 to four SFF-8482 breakout cable with SATA power, 3.3FT

SMUGDESK

SMUGDESK Mini SAS SFF-8087 to SAS SFF-8482 Breakout Cable with SATA Power, 3.3FT

SKU CH-F8XY-05YC8

Connects RAID controllers to SAS drives with integrated SATA power for simplified server wiring

  • Connects RAID controller to SAS drives via SFF-8087 to SFF-8482
  • Powers drives directly with integrated SATA power connector
  • Shielded design maintains stable signal transmission under heavy loads
  • 3FT length fits standard server chassis without cable clutter
  • Suitable for NAS, server and RAID storage system builds

Connect RAID Controllers to SAS Drives

This internal breakout cable links an SFF-8087 Mini SAS port on a RAID expansion card to four SFF-8482 SAS hard drives. An integrated SATA power connector supplies electricity directly to the drives, reducing cable clutter inside server and storage enclosures. Professional shielding suppresses electromagnetic interference for stable high-speed signal transmission under continuous heavy workloads.

Suited for Server Builds and RAID Arrays

Builders assembling file servers, NAS units or disk arrays will appreciate the 3.3FT length that fits standard chassis layouts without excess slack. The cable is not for external connections, nor for linking SATA-only controllers to SAS drives, and it cannot replace a backplane or expander when more than four drives are required.

Verify Controller and Drive Interfaces First

Confirm that the RAID card presents an SFF-8087 Mini SAS receptacle and that each target drive uses an SFF-8482 SAS connector before ordering. Ensure the power supply has a free SATA power lead for the integrated connector and that the 3.3FT reach matches the internal routing path in your specific enclosure.

Highlights

  • Connects RAID controller to SAS drives via SFF-8087 to SFF-8482
  • Powers drives directly with integrated SATA power connector
  • Shielded design maintains stable signal transmission under heavy loads
  • 3FT length fits standard server chassis without cable clutter
  • Suitable for NAS, server and RAID storage system builds

Specifications

No published specifications for this item yet.

Questions about this item

What RAID controller interface does the SFF-8087 end of this cable plug into?

The SFF-8087 Mini SAS connector attaches directly to a RAID expansion controller or HBA that provides a matching SFF-8087 port.

Will the SFF-8482 connectors work with my existing SAS hard drives that use the same interface?

Yes, each SFF-8482 SAS connector mates with a standard SAS hard drive using the SFF-8482 interface.

How can I verify the cable is delivering both data and power after installation?

The connected drives should spin up and appear in the RAID controller BIOS or operating system without errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.