We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 0.5m Mini SAS SFF-8087 to four SATA breakout cable with molded connectors

SMUGDESK

SMUGDESK Mini SAS SFF-8087 to 4 SATA Breakout Cable 0.5m

SKU CH-FZ15-P8CM0

Connects one Mini SAS SFF-8087 port to four SATA drives with a short .5 m length for tidy server wiring

  • Connect up to four drives from one SFF-8087 Mini SAS port
  • Compact 0.5m length keeps internal wiring tidy in tight chassis
  • Optimized signal structure maintains steady transmission for RAID arrays
  • Reinforced molded connectors resist vibration to prevent intermittent connections
  • Works with 2.5 and 3.5 SATA HDDs, SSDs and NAS backplanes

Compact Server Storage Cable

The SMUGDESK Mini SAS SFF-8087 to 4 SATA Breakout Cable splits a single internal SAS port into four independent SATA connections. At .5m (1.6FT) it is built for tidy internal routing inside compact server chassis. Reinforced molded connectors resist vibration and tension to maintain steady transmission for RAID arrays. It fits 2.5-inch and 3.5-inch SATA HDDs, SSDs and NAS backplanes.

Ideal for Internal RAID Builds

This cable suits administrators building DIY storage servers or expanding RAID configurations where a controller uses the SFF-8087 interface. It is not for setups requiring longer runs between separated enclosures, nor for drives using interfaces other than SATA. Builders needing to connect more than four drives from one port should look at alternative cabling topologies.

SFF-8087 Male to Quad SATA

The single specification that decides fit is the SFF-8087 Mini SAS male connector on the controller side. Your RAID controller or HBA must present this exact internal port; other SAS connector types will not mate. The four SATA ends are standard 7-pin data connectors compatible with any SATA drive or backplane.

Highlights

  • Connect up to four drives from one SFF-8087 Mini SAS port
  • Compact 0.5m length keeps internal wiring tidy in tight chassis
  • Optimized signal structure maintains steady transmission for RAID arrays
  • Reinforced molded connectors resist vibration to prevent intermittent connections
  • Works with 2.5 and 3.5 SATA HDDs, SSDs and NAS backplanes

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.5m cable reach from a rear-mounted SFF-8087 controller to front drive bays in a compact chassis?

The 0.5m length is designed for tight internal routing; measure your specific chassis path to confirm reach before purchase.

How can I verify each of the four SATA links is active after connecting the breakout cable?

Check the RAID controller BIOS or OS disk utility — all four attached drives should appear as independent SATA devices with no errors.

Does the package include mounting brackets or SATA power cables for the 2.5-inch and 3.5-inch drives?

Only the SFF-8087 to 4×SATA data breakout cable is included; power cables and drive brackets must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.