We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF8644 cable with IC chip breaking out to four SATA 7pin connectors .5m 28AWG

SMUGDESK

SMUGDESK Mini SAS HD SFF8644 with IC to 4 SATA 7Pin Cable .5m 28AWG

SKU CH-DKK6-G7DVC

A .5 m Mini SAS HD SFF8644 breakout cable with built-in IC converts one port to four SATA 7-pin connectors at 6 Gbps using 28 AWG copper

  • Built-in IC chip boosts signal stability for high-speed transmission
  • 1-to-4 breakout splits one SFF8644 port into four SATA 7-pin connectors
  • Supports up to 6Gbps bandwidth for server HDD, SSD and RAID interconnects
  • 28AWG high-purity copper wire ensures low-loss, reliable data transfer
  • 5m compact length fits tight server, NAS and external enclosure wiring

Mini SAS HD SFF8644 breakout cable

This .5 metre cable converts a single SFF8644 external Mini SAS HD port into four independent SATA 7pin connectors. A builtin IC chip strengthens signal stability for highspeed transmission. The 28AWG copper conductors support up to 6Gbps bandwidth for server hard drives, SSDs and RAID systems. It is designed for compact server, NAS and external storage enclosure wiring.

Suits administrators expanding internal

Builders who need a longer reach for fullsize rack layouts should look at a different cable length. The fixed .5 metre tail limits placement in larger chassis or between separate enclosures. Users requiring a direct Mini SAS HD to Mini SAS HD link without SATA breakout will not be served by this adapter. Anyone needing a different connector standard must choose another product.

Builtin IC chip and 28AWG copper improve signal

The integrated circuit amplifies the signal across the four SATA branches, reducing errors on longer or noisy runs. Premium copper conductors lower transmission loss compared with thinner wires. Together they maintain the rated 6Gbps throughput to each attached drive. No additional software or drivers are required for operation.

Highlights

  • Built-in IC chip boosts signal stability for high-speed transmission
  • 1-to-4 breakout splits one SFF8644 port into four SATA 7-pin connectors
  • Supports up to 6Gbps bandwidth for server HDD, SSD and RAID interconnects
  • 28AWG high-purity copper wire ensures low-loss, reliable data transfer
  • 5m compact length fits tight server, NAS and external enclosure wiring

Specifications

No published specifications for this item yet.

Questions about this item

Does this cable need a controller or backplane with an SFF-8644 Mini SAS HD port to connect four SATA drives?

Yes, the single SFF-8644 Mini SAS HD end plugs into a compatible controller or backplane port, while the four SATA 7-pin connectors attach directly to each drive.

Will the built-in IC chip allow this 6 Gbps breakout cable to work reliably with older 3 Gbps SATA hard drives?

The IC chip stabilises the 6 Gbps signal path, and the SATA interface negotiates down to 3 Gbps automatically, so older drives operate at their native speed without extra configuration.

After connecting the cable, how can I confirm each of the four drives is running at 6 Gbps?

Check the controller BIOS or operating-system disk utility; each drive should report a negotiated link speed of 6 Gbps if the cable and endpoints both support that rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.