We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF8643 breakout cable with four SATA 7-pin female connectors, 39.37inch shielded length

SMUGDESK

SMUGDESK Mini SAS HD SFF8643 to 4×SATA 39.37inch Cable

SKU CH-GA0T-5CHVA

Converts one Mini SAS HD SFF8643 port into four SATA 7-pin connectors for multi-drive server expansion with 39.37inch shielded cable

  • Converts one Mini SAS HD SFF8643 port into four SATA drives
  • 37 inch length suits medium internal routing in rack servers
  • Heavy-duty shielding cuts signal loss and electromagnetic interference
  • Plug-and-play connection for SATA HDDs and SSDs to SAS hardware
  • Stable high-speed transmission for RAID controllers and NAS systems

Mini SAS HD SFF8643 breakout cable

This internal cable converts a single Mini SAS HD SFF8643 port into four SATA 7pin female connectors. It enables multi-hard drive expansion inside servers, RAID controllers and high-capacity NAS storage systems. The 39.37inch length suits medium-distance routing in rackmount chassis. Heavy-duty shielding reduces signal loss and electromagnetic interference.

Suits builders adding SATA drives to Mini SAS HD

Designed for administrators expanding storage arrays using SATA HDDs or SSDs connected to RAID controllers or backplanes with SFF8643 interfaces. Plug-and-play installation simplifies deployment in enterprise environments. It is not for installations where the host connector differs from Mini SAS HD SFF8643 or where drives require a non-SATA interface.

SFF8643 to four SATA 7pin connector specification

The single specification that decides fit is the Mini SAS HD SFF8643 input breaking out to four SATA 7pin female outputs. Verify the host controller or backplane presents exactly this SFF8643 port before purchase. Cable length is 39.37inch with shielded construction for signal integrity.

Highlights

  • Converts one Mini SAS HD SFF8643 port into four SATA drives
  • 37 inch length suits medium internal routing in rack servers
  • Heavy-duty shielding cuts signal loss and electromagnetic interference
  • Plug-and-play connection for SATA HDDs and SSDs to SAS hardware
  • Stable high-speed transmission for RAID controllers and NAS systems

Specifications

No published specifications for this item yet.

Questions about this item

What type of controller or backplane must I already have to use the SFF8643 connector on this cable?

You need a Mini SAS HD SFF8643 port on a RAID controller, storage backplane or enterprise-grade storage system to plug this cable into.

Will the four SATA 7pin connectors work with older SATA hard drives or SSDs I already own?

Yes, each SATA 7pin female connector accepts standard SATA HDDs or SSDs for multi-drive expansion.

How can I verify the cable is delivering stable high-speed data transmission after installation?

Check that all connected drives are detected by the RAID controller or NAS and that data transfers complete without errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.