We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK Mini SAS HD SFF8088 to SFF8643 cable, black flat connectors, 2m length

SMUGDESK

SMUGDESK Mini SAS HD SFF8088 to SFF8643 Cable 2m

SKU CH-J4R2-WGX9R

Connects external SFF8088 ports to internal SFF8643 backplanes with 28AWG copper for stable 6Gbps SAS and SATA data transfer

  • Connects external SFF8088 to internal SFF8643 for flexible server storage
  • Delivers stable 6Gbps bandwidth for RAID controllers and disk enclosures
  • 28AWG low-loss copper wire ensures reliable signal transmission with minimal attenuation
  • Black flat-style connector enables tidy wiring in chassis and rackmount deployments
  • 2m extended length supports long-distance connection for enterprise servers and NAS systems

Connection Interface

This Mini SAS HD cable bridges an external SFF8088 port to an internal SFF8643 connector for server storage links. It carries SAS and SATA traffic at 6Gbps across a two metre run. The 28AWG copper conductors and shielding maintain signal integrity over the full length. Flat black connectors keep routing tidy inside chassis or across rackmount enclosures.

Target Use Cases

The cable suits administrators wiring RAID controllers, disk shelves or multi-drive NAS units that mix external and internal SAS ports. It works for both internal server routing and external storage expansion scenarios. Builders needing a different pinout, a shorter reach or a higher signalling rate should look at other cable types. Anyone without SFF8088 or SFF8643 endpoints cannot use this link.

Installation Notes

Push each end into its matching port until the latch clicks; no tools or drivers are required. The flat connector profile eases cable management in dense racks but can snag on adjacent components if pulled at sharp angles. Verify the keying on both SFF8088 and SFF8643 sockets before applying force to avoid bent pins. Route the 28AWG wire away from sharp metal edges to preserve the shielding.

Highlights

  • Connects external SFF8088 to internal SFF8643 for flexible server storage
  • Delivers stable 6Gbps bandwidth for RAID controllers and disk enclosures
  • 28AWG low-loss copper wire ensures reliable signal transmission with minimal attenuation
  • Black flat-style connector enables tidy wiring in chassis and rackmount deployments
  • 2m extended length supports long-distance connection for enterprise servers and NAS systems

Specifications

No published specifications for this item yet.

Questions about this item

Do I need a controller or enclosure with an SFF8088 port to use this cable?

Yes, the SFF8088 end plugs into an external port on a RAID controller, HBA or disk enclosure, while the SFF8643 end connects to an internal backplane or drive cage.

Will this work with my existing 6Gbps SAS or SATA drives and backplanes?

The cable is rated for 6Gbps bandwidth, so it matches the speed of 6Gbps SAS and SATA drives and backplanes without limiting their performance.

How can I verify the link is running at the expected 6Gbps after I connect it?

Check the controller BIOS, HBA utility or operating-system disk tool; they will report the negotiated link speed as 6Gbps for each attached drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.